|
The modern bicycle has multitudinous parts. From the ground to the rider, there can be as many or more than approximately forty different specialized parts. Some of those parts are important, like the chain, and some of those parts can be a little more arbitrary, like a bike seat bag. One of those more important parts, if maladjusted, can be hazardous for your health and for your safety while bicycling. This part in question is the seat. Fixing the seat at the right height is an easy thing to do. First, rotate the pedals so that one of them is at the bottom of it's stroke and the other is at the top. Place your foot on the lower pedal and bend your knee to about a 25 to 30 degree angle. Take note of how high or low you are and set the seat at that height. To set the seat, there is a clamp on the frame where the seat post enters the frame, just tighten that and you're done! There are all sorts of reasons why you might need to change your bike seat height to accommodate different riding scenarios, especially in mountain biking or long distance road biking. This being the case, it is always helpful to mark the seat post at any of the heights that work best for you. The reason to have a bike seat at the proper height is because if the seat is too high, you'll constantly be over-extending your knee. And if the seat it too low, you won't be able to get enough power into the pedal stroke. If you need any further information about adjusting or setting your bike seat height, you may want to either go to your local bike shop or click around on the internet. Happy adjusting! You can find information about kids bike seat. on http://www.kidsbikeseat.org/
Related Articles -
Bike Seat, Kids Bike Seat,
| 
