Grade: National On the national certification standard of the Provisional Regulations
Order to meet the domestic and international quality certification to carry out the needs, now with national certification standards and
Programming. Temporarily for the following: 1, the state used to certify product quality standards should be national standards to international levels.
2, product quality has reached international level and not the corresponding national standards, national standards should be developed first, and then
Authentication. 3, quality certification with the national standards, using the same standards of other countries to formulate procedures for the preparation and compilation methods
Number. 4, the development of national standards, quality certification, the standard review must be made at the international level, the standard of assessment
Price or description, and write the review of minutes, and then submitted for approval.
5, with current national standards to international level of standards as a national accreditation standard, the standard should be
Competent authorities for approval to the State Bureau of Standards approved.
6, in order to facilitate identification, all with national certification standards for approval, the approval time of publication distribution and printing, all on the cover
The standard name of the following states "(for certification)" character, in the standard directory, each with a standard for certification
Serial numbers, printed on the certification mark.
7, when our participation in international certification organizations (such as the IECQ Quality Assessment System) has issued a certification standard,
Certification standard in the development of our country when, in principle, identical with the official standards of the organization and into our national standards body
System. When the organization has not adopted a formal standard temporary file, the temporary file should be developed for our pilot country
Standard. Once the temporary file is replaced by the official standard, China should immediately adopt a formal standard, and try to replace the original standard
Standards. 8, when the use of international standards certification organization, in order to meet the needs of work, certification number with the standard method Except for national standards
number, the number needs to be national standards and international certification organizations, sub-standard number line tied down.
Standard form when the certification system has hierarchical structure, it would be the national standard code number followed by dot and, in principle,
Just add a dot and number, such as the need for more point and the numbers attached, you should seek the National Bureau of Standards agreed. Compiled after the dot
Number, by setting standards authorities in the first state in the standard Draft for Approval.
Certification standard number of electronic components by the following methods.
Standard specification for the total GB ××××-×× GB ××××.-×× IEC × × × -1 -×××× IEC ×××-×-××××
QC × × × × × × QC × × × × × × Blank detail specification for detailed specifications
GB × × × × × - × × GB × × × × × × × - × × IEC ×××-×-×-×××× IEC ×××-×-×-×××
-×××× QC × × × × × × QC × × × × × × Including: GB ××××. ×. ×. × - × ×
reign approved detail specification number Blank detail specification number specification number standard number IEC ×××-×-×-×××-××××
release reign detail specification number Blank detail specification number specification number (where 1 is the total number specification)
standard number 9, certified by international certification organizations, standards of preparation methods, generally based on GB1.1-81 "prepared by the general standard
Requirement "for processing. If the international certification organizations, editorial articles of association do not allow changes to the original preparation method can also be used.
10, when the national certification standard in reference to international standards, the standards referenced in principle, be allowed to be our first
Identical with, reference to international standards and can be temporary number. But the translation of international standards cited must be accurate, and by
Referenced standardized technical focal point consideration of accreditation.
11, the Interim Provisions for interpretation by the National Bureau of Standards.
12, the Provisional Regulations shall come into force from the date of publication. I am a professional writer from China Toys Suppliers, which contains a great deal of information about baby christmas dresses , smocked infant dresses, welcome to visit!
Related Articles -
baby christmas dresses, smocked infant dresses,
|
