|
I am glad you are here because today you will finally learn how to grip your own skateboards. This is something that every skateboarder should know how to do. No skate shop owner or worker wants to grip customers boards so now it is time for you to learn how to do it yourself! Follow these simple steps and you will be on your own in to time. Step 1 - Things that you are going to need: Your skateboard. Your grip tape. A nice new sharp razor blade. Something to file the grip tape firmly onto the edges of your board. A screw driver will do just fine. Also grab a pencil or something with a point so you can poke the holes on your board. Now that you have all those things just find a nice area with a good flat surface. Any regular kitchen table will be perfect. Step 2 - Put your skate board flat on the table with the graphic against the table. Grab your grip tape and peal the paper off. Place the grip tape firmly and perfectly on top of your skateboard. Make sure it is on evenly. Once it is on evenly you must push down on it until it is on secure so it wont fly off. Step 3 - Now grab your screw driver or whatever tool you have chosen to file the grip tape firmly onto the edges of your skate board. Do just that. File the grip tape firmly onto the edges of your skateboard! If you do it correctly you should see it kind of starting to change color. It should start looking white. This means that the grip is on the edges of your board nice and secure. Step 4 - Pick up your razor blade and simply cut off the excess grip tape that is on the edges of your board. Please be careful! The easiest way to do this is to cut all of it off in 4 different parts. First cut the 2 flat side parts. Then cut the 2 round parts that are along the nose and tail of your board. Step 5 - Now grab your pencil or the object that you chose that has a point. Simply poke the 8 holes through your grip tape through your board. By doing this you will be able to put your hardware on much faster and a lot easier. It is a nice little technique that I have learned from my own experience. Now you are done. That is it. Simple and easy enough for you I hope! There is no need to bother other people by making them grip your boards for you. Please do it yourself all the time from now on. It is much better and more fulfilling. Now just put your brand new skateboard onto your trucks and go out and skate. Written by http://instantskate.com founder and dedicated skateboarder. Click here to enjoy much more amazing skateboarding content.
Related Articles -
skate, skateboard, skateboarding, grip skateboard,
| 
