|
Server Storage: Three main disk interface diagram - servers, switches, routers - Education Industry by zyzy wang
 |
|
|
Server Storage: Three main disk interface diagram - servers, switches, routers - Education Industry by ZYZY WANG
|
|
| Article Posted: 12/05/2010 |
| Article Views: 110 |
| Articles Written: 2301 - MORE ARTICLES FROM THIS AUTHOR |
| Word Count: 769 |
| Article Votes: 0 |
|
Server Storage: Three main disk interface diagram - servers, switches, routers - Education Industry |
|
|
|
|
|
Business,Business News,Business Opportunities
|
|
Now the server hard disk interface technology used in the main, two, SATA and SCSI, SAS drives use the product is also available now, of course, high-end optical drives, including the first two are the most common. Here we SATA, SCSI, SAS interface technology such as a brief introduction.
1, SATA Interface SATA (Serial Advanced TechnologyAttachment) is the acronym for Serial ATA, now can see a SATA-1 and SATA-2 are two standards, the corresponding speeds are 150MB / s and 300MB / s. SATA has replaced the main bottleneck for the PATA interface technology. From this point on the speed, SATA SATA mode of the transmission advanced than PATA, PATA hard drive to far flung behind. Second, the data transmission from the point of view, SATA than PATA stronger anti-interference ability.
SATA-1 and has been widely used, its maximum data transfer rate of 150MBps, the signal line up to 1 meter. Commonly used point to point SATA connection, that a connection on the motherboard SATA interface, the other end directly connected hard drive, no other devices can share the data lines, and parallel ATA to allow this situation (per data line can be connected to a -2 a device) and, therefore, do not like parallel ATA hard drive set as Master and Slave.
In addition, SATA hot-swap function of available PATA can not be compared, using this feature can be more easily set up the disk array. As the serial data line structure using only four pins, so compared with starting up the parallel port to install a more convenient and more conducive to reducing the cable box, a favorable heat.
2, SCSI Interface SCSI (Small Computer SystemInterface) is designed specifically for small computer system interface mode storage unit can be multiple devices on the computer a dynamic division of labor operate the system multiple tasks simultaneously required flexibility the appropriate distribution of mobile and dynamic completion.
SCSI specification development today, is already the sixth-generation technology, from the time just to create the SCSI (8bit), WideSCSI (8bit), Ultra Wide SCSI (8bit/16bit), Ultra Wide SCSI2 (16bit) , Ultra 160 SCSI (16bit) to today's Ultra 320SCSI, speed from 1.2MB / s to the current 320MB / s with a qualitative leap. The current mainstream SCSI Ultra320 SCSI hard drive interfaces are used, can provide 320MB / s interface transfer rate.
SCSI drives also have a special hot-swap technology, SCA2 Interface (80-pin), used in conjunction with the SCSI backplane, you can easily hot-swappable hard drives. Current working groups and departmental servers, hot swap function is almost essential.
3, SAS Interface SAS is the abbreviation for Serial AttachedSCSI that Serial Attached SCSI. November 26, 2001, Compaq, IBM, LSI Logic, Maxtor and Seagate announced the establishment of the Joint Working Group SAS, the objective is to define a new serial point-to enterprise-class storage device interface.
SAS technology into the SAS expander, so the SAS system can connect more devices, each extension allows to connect multiple ports, each port can be connected to SAS devices, the host or other SAS expander. To protect user investment, SAS is also compatible with standard SATA, which makes SAS, SAS and SATA backplane compatible with two types of hard drives, the user, when using different types of hard drives do not need to re-invest.
Currently, SAS Interface rate of 3Gbps, SAS expander of its more than 12 ports. Soon, there will be 6Gbps 12Gbps high-speed interface, and even there, and there will be 28 or 36-port SAS expander appears to suit different application requirements.
Summary: As SCSI with low CPU occupancy, multi-task concurrent operation, high efficiency, multi-connected devices to connect long distance, etc, for most server applications, recommended SCSI hard drives, and controllers using the latest Ultra320SCSI ; SATA hard drive also has hot swap capability, and can interface with good scalability, such as rack-mounted servers using SCSI-SATA, FC-SATA Interface, and the SATA port bit by device (PortMultiplier) , it has better flexibility than SCSI. For the low-end small server applications, you can use the latest SATA hard drive and controller.
Set hard disk interface and type, we must focus on the above-mentioned study the impact of hard disk performance specifications, according to speed, single-disc capacity, the average seek time, cache and other factors, combined with capital budget , select the most appropriate cost-effective hard disk program. I am China Crafts Suppliers writer, reports some information about bi xenon bulbs , xenon philips hid.
Related Articles -
bi xenon bulbs, xenon philips hid,
|
Rate This Article  |
|
|
|
|
|
Do you Agree or Disagree? Have a Comment? POST IT!
| Reader Opinions |
|
|
|
|
|
