|
If you are asking what minerals are in tap water, the answer depends on where you live. There may be none, a few or an excessive amount. It all has to do with the rocks. All naturally occurring sources have some mineral content, because of the rocks and soil in the area. Calcium, potassium, iron and sodium are a few that may be present. Too much calcium creates a problem for many people. It stains fixtures and reduces the effectiveness of sodium. You might not appreciate the taste of calcium or iron. Too much sodium is bad tasting, too. A slight trace of sodium actually enhances the flavor. Of course it is only because of the mineral content and other dissolved particles that creates a taste. Completely pure H2O would have no taste at all. Iron does not taste good. It may be naturally occurring or due to containment tanks or piping. Most people like the taste of potassium. As long as the content is not too high, that mineral causes no problems. There are some other factors that determine; what minerals are in tap water. The use of a reverse osmosis step in the treatment facility greatly reduces any naturally occurring mineral content. Sadly, the purification process does not remove chemicals. Because of industrial activity, there are thousands of cancer-causing chemicals in publicly treated supplies. Samples taken from inside of homes have shown high levels of pesticides, herbicides and other toxins. Obviously, these samples were taken after the treatment facilities had done everything within their power to make the public supply safe. These chemicals are not immediately toxic. People are not getting sick or dying because they consume them. The chemicals build up in the body and do damage over time. That’s how carcinogens work. Instead of asking what minerals are in tap water, you might want to ask about the chemicals. Again, it depends on where you live. The good news is that you can do something about the mineral content and the chemical content right in your own home. Today’s effective multi-stage selective filtration devices balance mineral content and remove chemicals. They also remove other particles that evade the treatments used by public facilities. Cysts for example can be removed at home, but not by the big facilities. If you have your own water filter, you will know what minerals are in tap water. The better systems add a trace of potassium and sodium while removing traces of copper and lead. What you end up with is something that tastes fresh and healthy. Gordon Hall is fervent about enabling you and everyone to live a healthy lifestyle, and is an ardent reviewer of Water Purification Systems. Visit his website now at Water-Safe-And-Pure.com to discover which Water Purification Systems Gordon recommends after far ranging comparisons.
Related Articles -
what, minerals, are, in, tap, water,
| 
