|
Why R & D figures stamping platen Die Cutting Machine At home and abroad advanced stamping die stamping equipment platen Die Cutting Machine And rotary hot stamping die-cutting machine two. Existing platen die cutting machine stamping machine structure, determine the transfer time to change the random speed changes, the higher the speed of the shorter transfer time. As the platen stamping stamping die-cutting machine effect by the large area of stamping platform, transfer time, machine speed constraints, at home and abroad platen die cutting machine stamping stamping speed and stability have been 4000 / hours to 7500 / hours. Go foil institutions both domestic and foreign platen stamping die-cutting machine as structural constraints, can only go vertical or vertical and horizontal foil foil to go alone, but not both vertical and horizontal take the foil. Therefore, in the stamping process of hot stamping foil must be cut to meet the requirements of narrow foil stamping process volume. Foil stamping low utilization, increased production costs, while also lowering production efficiency. Digital Flat-stamping die-cutting machine is for the current platen die cutting machine stamping the main problems, using computer technology, digital technology, microelectronic technology, no shaft drive and other high technology, after years of painstaking research, trial and error, numerous improvements, it successfully developed. This technology developed by the company R & D center, with fully independent intellectual property rights, and obtained patents. Digital Flat-stamping die-cutting machine of several key technologies 1, the number of paper with the XY-axis positioning system functionality to the paper The system is not a traditional feeding station, but the number of absorbing paper with a mouth tooth row of high-precision delivery to the feeding of paper, it can identify the direction of the paper edge XY amendment. Can also identify the baseline for printing trimming XY direction, the correction accuracy is 0.03mm; this paper, the stability of the numerical control delivery speed of delivery of paper per hour 12,000. It also can separate to other Printing Equipment That alone has the electronic drawing as a pre-regulation and regulation of electronic to paper machine. 2, no conventional teeth thousand paper digital closed-loop system Reciprocating Feeder The system as a separate component fixed on the lifting platform, it did not intermittent gearbox traditional machine, chain tooth row groups and before and after the positioning device, but rather to use the most advanced linear closed-loop drive device. Its advantages are: high repeat positioning accuracy for the 0.01mm; the number of small parts, only the traditional machine 1 / 5; positioning accuracy of machine parts from wear and tear resulting from the clearance effects; both high and low processing speed, delivery time for each paper remain stable. So that feeding time utilization increased by 25%, due to the use of the body feeding, which makes the structure more simple and reasonable. 3, personalized digital stamping platform It can stamping process requirements, set platform and substrate contact time and the stamping pressure, stamping the screen with all the pressure-balanced adaptive function, so it does not need operator cumbersome plate. The use of common low-grade hot stamping, the stamping speed 1000 per hour to 10,000 an hour, the transfer time are the same, exactly the same quality stamping. 4, the number of two-coordinate system take the foil Go foil stamping die-cutting system mounted directly on the platform, fixed platform. Use foil according to the width of the whole site linked to foil stamping. I am an expert from tool-cabinet-china.com, while we provides the quality product, such as China Tool Chest , Tool Sets Manufacturer, Roller Cabinet,and more.
Related Articles -
China Tool Chest, Tool Sets Manufacturer,
|
