|
Tongji University in Shanghai Our three sets of procurement DV I input, the output of the Quad, input, output signal resolution are 1080p, images, text clear, Tongji University on the effects of very satisfied students. DC 3000 Series split device features: 1 Pure hardware, no operating system, Power supply Redundant Backup Splice controller pure hardware architecture, hardware core for the large-scale FPGA array, no CPU , Hard drives, memory and other conventional computer accessories. The modular design, modules with the number of input and output signal of how much the increase or decrease. Pure hardware architecture of the controller, it is not itself a computer, but a professional image processing equipment, and card-based industrial machine stitching device type there are essential differences in the system. DC3000 with all hardware, no operating system, the internal operation mechanism of the core self, no card-type traditional processor crashes, blue screen, and viruses. All systems working in parallel, without risk of the whole system crashes; the power that is working, can run 24 hours a day throughout the year. At the same time the power by way of 1 +1 Redundancy (optional), to further increase the high stability of equipment operation. 2 High stability, a variety of control methods Division controller without operating system, the virus can not be infected; all working in parallel, without risk of the whole system crashes; system data prior to curing factory, can not change, unexpected power outages will not cause data loss, the controller can withstand frequent switching machine . DC3000 series of separate multiple control devices, including the RS232 serial port and Ethernet remote control. 3 Support multiple input and output signal formats, with input signal characteristics and memory Can support RGB, DVI, S-Video, NTSC / PAL format signal input from the 640x480 resolution to 1920x1200; input signal for each sample has characteristics of memory function, the first-class matrix can be any switch input signal As long as the sampling done to adjust the signal and then this input, the device automatically configure memory parameters, without the need to adjust second sampling. RGB, and DVI signals support simultaneous output, user-friendly configuration display unit. 4 , RGB And Video Window can switch back and forth, overlapping; In the display, all the RGB and Video window can switch back and forth, overlapping. 5 , Chassis Hot swap structure, high integration, low power consumption The chassis structure DC3000 system-wide use of hot-plug structure, equipment, output from the input card to card, from the power supply to Fan Can be easy to replace, user-friendly upgrades and maintenance. DC3000 series divider using modular design of the design ideas, input and output full support for hot swap, effectively reduce the failure rate of equipment, greatly improve the device stability. At the same time in the event of failure, repairs are simple, just replace the module to the next failure can be. Equipment in the control structure of a decentralized control structure, the exchange of modules within the hierarchical distributed control technology used inside the module Communicate Use memory mapping techniques, combined with extensive use of high-performance FPGA and high-speed digital bus switching technology, the system's data processing capacity is board-type divider 50 times. System are low power consumption chipset Machine Full load operation only 65W, far lower than the card-type divider. The e-commerce company in China offers quality products such as handheld gps navigation , China car navigation device, and more. For more , please visit portable gps car navigation systems today!
Related Articles -
handheld gps navigation, China car navigation device,
|
