|
Recently, the EU repeatedly informed of children's toys made in China fail, of which, were repeatedly informed of the reasons are in violation of EU toy safety directive (No. 88 / 378/EEC). The technical requirements of the Directive are briefly introduced for the exporting enterprises for reference. EU toy safety directive includes a physical and mechanical properties of toys, flammability, chemical properties, electrical properties, health and radiation to the requirements. Physical and mechanical properties 1. Children's toys and its components must have sufficient mechanical strength and stability to withstand the pressure when used to avoid cracking or deformation of the children toys, injury to the body. 2. Children's toys can touch the edge of the processes, rope, wire and fasteners etc. must be scientifically designed to minimize the exposure of children caused by physical injury. 3. Children's toys should be scientific and rational design and assembly, to avoid the toy component moves cause injury to children. 4. Toys for children under three years old, toys themselves, toys, toy parts and components of its size to be removable large enough to avoid the child swallowing or enter respiratory tract. 5. Children's Toys, the packaging components and sale of children to avoid entanglement or suffocation. 6. In shallow water can be used to carry children's toys to minimize the loss of buoyancy or support the role of toy dangers posed. 7. Children have access to toys and can form a closed space, there must be a toy exports, the export from the inside easily open. 8. Can be loaded with toys, children's sports as much as possible to install the brake system, brake system, the type with the toys and sports performance fit, and easy to operate, required to prevent children from being thrown out or to cause bodily harm to users and third parties. 9. The use of toys to ensure that the bullet bullet type, composition and launch of energy users and third parties will not cause bodily injury. 10. Includes heating components, toys must ensure that: (1) toys in the most accessible of the surface temperature will not cause burns; (2) toys in the liquid and gas will not escape due to high temperature or pressure caused by burns, burns or other bodily harm. Flammability 1. Children's toys not included in the child's environment there is risk of combustible components, the composition of materials must meet the following conditions: (1) exposure to open flame or sparks is not flammable; (2) non-flammable; (3) when the fire slow burning slow or dissemination; (4) the composition of material to be processed toys in order to delay the combustion process. 2. Toy if the EU Directive 67/548/EEC (hazardous material classification, packaging and labeling instructions), set out the material requirements of such non-combustible material can not become combustible volatile substances were absent. 3. Toys can not be explosive. 4. Chemistry of children's toys may not contain the following substances: the mixing of chemical reaction or explosion when heated; and oxide mixture will explode. Contain volatile, flammable or easily in the air the formation of the volatile explosive mixture with air. Chemical Properties 1. Toy to scientific design and manufacture of components in the toy were swallowed into the respiratory tract, and skin, mucous tissue and eye contact will not cause bodily harm. Must comply with EU product catalog, prohibitions, restrictions on the use and labeling requirements of hazardous substances. 2. In order to protect children's health, children toys, toxic chemicals, biological daily intake of no more than limited value, the specific limit of Sb 0 .2 g, arsenic 0.1 g, barium 25 g, Cd 0.6 g, 0.3 g Cr , Pb 0.7 g, mercury 0.5 g, selenium 5 g, or EU law limits the value of other substances. 3. Toys can not contain more than the EU Directive 67/548/EEC and Directive 88/379/EEC provided for users of the health damage can lead to harmful substances. Electrical Properties 1. Electronic Toys Power rated voltage of not more than 24 volts, toys, various components of the voltage can not exceed 24 volts. 2. Toys with the power connector or may be connected with the power components, wires and other electrical conductors must be properly insulated to prevent electric shock. 3. The design and manufacture of electronic toys to ensure that all the contact surfaces in contact with the highest temperature will not cause burns. Health requirements design and manufacture of toys must meet the requirements of hygiene and cleanliness to avoid infection, disease and pollution. Radioactive toys may damage children's health not contain radioactive components and materials, must meet the EU directives 80/836/Eurato m of the requirements. The e-commerce company in China offers quality products such as duracell usb charger Manufacturer , electric scooter battery charger, and more. For more , please visit aaa nicd battery today!
Related Articles -
duracell usb charger Manufacturer, electric scooter battery charger,
|
