|
1 Experience to analyze the factors that may cause vibration of centrifuges As WG-800 Centrifuges In the structural design, manufacture and maintenance not done imperfections, especially in the use of process because of improper operation, mechanical damage or excessive wear and other reasons, the centrifuge is easy to cause vibration, the vibration caused empirical analysis of factors that have the following point. (1) centrifuge parts factor. period of time after use bearing friction, the radial clearance increases, resulting in deviation from the main axis of inertia caused by the transit center axis machine vibration. In addition, the bearing assembly during the installation process quality can not be guaranteed, overload operation, and bearing themselves as the quality of life issues caused by the phenomenon of rupture damage, can cause machine vibration. scraper after frequent use and wear, and the material layer increases the contact area, resulting in increased resistance and the discharge blade loosening caused by vibration discharge. feeding valve damage due to feeding the feed valve too much, too fast, are likely to result in overloading the machine running and vibration. drum out of balance, causing vibration. bolt loosening is a common fault, it not only causes the equipment to vibration, but also to bolt fracture. (2) human control factor. As the operator feed material is too dry and too much or PVC plastic and caused more than plug the machine vibration; In addition, the operator should check the filter is damaged, if damaged should be replaced because of damage filters Centrifuges can also cause vibration. 2 exclusive analysis Centrifuge vibration occurs, the commonly used manual on the scraper discharge, and then into the artificial method of cleaning the drum to be addressed, to be clean drum, the vibration can often be better to eliminate, but if there strong vibrations, the operator response time or no time because treatment is often cause vibration broken anchor bolts. To this end, the analysis of the vibration, centrifuge at no load, with load and even after the vibration of the drum by the clean can run smoothly, so that centrifuge components excluded the possibility of vibration induced damage factors sex. Centrifuge after repeated cycling, because of the automatic washing drum ineffective, resulting in most of the filter plug hole, when the feed, the feed liquid phase can not be discharged in time, have a great centrifugal force, which is vibrating centrifuge the main reason. 3 WG-800 centrifuge and causes of common faults (1) centrifuge vibration reasons. bolt loose, body bolt fracture, feed too fast, too full, material is too dry, filter damage, bearing damage, harrow tooth failure. (2) occurs when the load operation causes vibration. feed pipe valve leakage, stop the machine in the solid phase after filling; without stopping to clean in the solid phase sediment left in the bolt; drum and differential Parts for the occurrence of loosening. (3) centrifuge feed operation causes vibration occurred. uneven solid-phase feeding, bolts caused by incorrect relative movement of the drum, spiral leaves uneven wear. 4 preventive measures and the effect of vibration To minimize the imbalance of centrifugal force centrifuge vibration moment to address the essence of the problem, do this, Weifang Yaxing Chemical Co., Ltd. to take the following measures: to enhance operational control and improve the quality of feed solution, the fabric as even as possible; maintain a strict quality control large washing, cleaning and manual cleaning to the combination method, which automatically large washed twice, once washed, washed clean to check quality; regular inspection, cleaning filters, to ensure filter effects, to prevent the stolen goods, cleaning pipe blockage; enhance operator accountability Education And to enhance the skills of its fast processing failure. We are high quality suppliers, our products such as Wafer Butterfly Valve Manufacturer , Wafer Butterfly Valve Manufacturer for oversee buyer. To know more, please visits Pneumatic Butterfly Valve.
Related Articles -
Wafer Butterfly Valve Manufacturer, Wafer Butterfly Valve Manufacturer,
|
