At present, China's wind power equipment market as the machine, like other industries, not only to bear from their own threat of competitors within the industry, but also to guard against potential entrants from related industries, the competitive alternatives, while industry profits but also by the upstream suppliers and downstream customers of the extrusion. Start on the first exposure to policy "umbrella" for wind power equipment industry, today will mark the more open playing field.
History The same rich wind resources in China: It is estimated that the actual land can be developed in China Wind Energy Reserves of 253 million kilowatts, the wind field can be developed offshore wind resources on land three times the wind energy resources can be developed in China about 10 million kilowatts. China's wind power installed capacity to accelerate growth: in 2006, China's new wind power installed capacity of 1337MW, accounting for 8.9% of the increase in global installed capacity, up 165.83 percent; to 2006 the cumulative installed capacity of wind power reached 2604MW, total global wind power installed capacity of 3.5 %, the cumulative installed capacity increased 105.29%.
Domestic policy environment is getting better: State by requiring fans localization rate, wind power to support full Internet access and taxation policies on wind power and vigorously promote the development of local fan industry.
Foreign manufacturers in China to dominate fans: new installed capacity in 2006 accounted for 55.10%, representing cumulative total domestic installed capacity of 65.92%. The first three of which foreign manufacturers Vestas, Gamesa and GEWind occupy respectively of total domestic installed capacity of 18.73%, 18.63% and 10.74%. Relative local manufacturers, they have the technology and capital.
Domestic turbine manufacturers emerged a group of outstanding companies: Sino-fan manufacturers of domestic capital are: Golden Wind, China Rui, arrived in East gas, electricity and benefits Germany and Kazakhstan. In addition to the larger Goldwind, have competitive with foreign manufacturers, the rest of the domestic market share in small turbine manufacturers, at the initial stage. Rui and the East China and other large state-owned gas on a solid financial strength, good manufacturing base, are catching up, I believe will take place in the foreign market.
Domestic fan manufacturing industry is facing a good opportunity for development: in all types of new energy resources, wind power generation is relatively mature technology, the most large-scale commercial development conditions, a relatively low cost, by the state of attention. Huge domestic fan manufacturing industry has the vast domestic market, relying on domestic cheap labor costs and strong manufacturing base, facing a good opportunity for development, will accomplish much in the domestic and international markets. Wind power equipment manufacturing industry there are also many risks: policy risks, wind power has brought the risk of technological advances, industry competition risks.
Over the past decade, China's large fan basically from scratch manufacturing has now mastered the 750KW units and parts machine design and manufacturing technologies and achieve volume production, the current level of domestic MW VSCF units under development and is part of the unit into operation, MW Blades, Gear Box and generator are also completing the development and put into small batch production, but depends on further development of electronic control system.
2004 years, a number of powerful companies involved in wind power equipment manufacturing is expected to boost the MW level in the recent localization of advanced units and domestic production and supply capacity level, but overall, the whole design and related Key Component design and manufacturing technology remains our long-term development of the largest fan manufacturing bottleneck.
1996 years ago: wind power equipment directly imported from abroad prior to 1996, China's large-scale grid in the pilot and demonstration stage, and the main international bilateral aid projects, these projects wind turbine manufacturers are from abroad enterprise.
1996 years: the introduction of state support of wind power technology, and innovation and scale development, to start and accelerate the domestic wind power industry in this period, China passed the "wind power development plan", national research programs, "863" and the bond-financed projects such as wind power concession projects, these projects support the introduction of wind power technology and Innovation Development and manufacturing scale. Currently, domestic enterprises have mastered the following capacity of 750KW wind turbine assembly and key component design and manufacturing technology, and an initial grasp of the unit design technology, a large-scale production; new MW class direct drive permanent magnet wind turbine and double-fed variable speed constant frequency wind turbine is also put into trial operation in 2005.
End of 2006, there were 11 domestic main fan assembly of large enterprises, then investment accounts within the new market share of 41.20 percent, has reached 25.68 percent. But this development is very uneven in 11 firms, of which Goldwind ahead, China and a number of sharp business just started.
2004 years: a number of attractive business prospects in the market to attract fans to add the MW-class wind turbine technology introduction and development, in order to seize the market into this period, by the "Renewable Energy Law" and "renewable energy and long-term development plan, "inspired by a great many domestic businesses optimistic about the potential of wind power equipment market, the desire of strong economic strength and technological accumulation to enter and seize market share. At present, the machine has clearly into the fans with more than 20 manufacturing companies; In addition, some companies are carried out into the fan manufacturing preparation, including market research, technical development and Cooperation Negotiations work.
Very bullish because the market for advanced and seize the market catch up with the motivation, the newcomers decisions and actions very quickly, a large proportion of enterprises prefer "first product produced in any case, to occupy the market" and its development to the intention of in-depth China market, foreign fans to buy production licenses fan manufacturers, direct introduction of the mainstream of the international market for more than 1MW unit capacity, variable speed constant frequency pitch wind turbine manufacturer technology assembly, and strive to quickly put into mass production. I am an expert from China Toys Suppliers, usually analyzes all kind of industries situation, such as welding jig , flush cut saw.
Related Articles -
welding jig, flush cut saw,
|
