|
At present, Glue Glue the rapid development of the industry, but the new product development and technical innovation ability, the lower grade of products, restricting the further development of the industry. Interview with this reporter recently learned that two companies began to focus on China's adhesive technology innovation, has made some progress. According to preliminary estimates by experts, 2007 China's production of adhesives and sealants for the 3.125 million tons (excluding the three formaldehyde glue), an increase of 11.53%; Sell Amount of 42.6 billion yuan, up 25.3%. Sales growth is higher than output growth, less because of rising raw material price rises made, high quality, high performance, rapid growth of high value-added products become important. In 2007, high-quality, high performance adhesive of new products in more than 15% production growth, Environmental protection The output of products increased more than 14%. Adhesive industry currently restrict the most important factor, is still new product development and technological innovation capability is weak. For example: the current water-based neoprene in Europe, the United States, Japan already successfully developed, but research institutions in China do not even have yet. At present the majority of our business as adhesive or little research funding shortage, lack of high-quality technological innovation, some of the research institutes of the adhesive also marginalization. This resulted in many adhesives and sealants products manufacturer aging, single species, product quality and grade is not high, slow development of new products and technology, keep up the fast-growing market needs. Meanwhile, China's adhesive business intensive, large-scale development difficulties, lack of internationally competitive enterprise groups, many enterprises, small scale. According to incomplete statistics, China's production of adhesives and sealants over 3000 enterprises, distributed in 28 provinces, municipalities and autonomous regions, but the production scale (annual sales of 1 billion yuan), the technical level Only Baiyu Jia, that would be difficult to scale advantages and industry work together, it is difficult in new product development and technological innovation, environmental protection Energy Personnel training in areas such as major inputs. But this situation is occurring change. Hegemonic power, such as the South China Sea Chemical industry Co., Ltd. and Zhongshan University Cooperation R & D polyurethane adhesive water shoes, large-scale pilot has been successful, will change the product has been imported in the history of our country. In 2007, Guangzhou Wang Cheong Adhesive Tape Factory and other three products, production of pressure sensitive adhesive was awarded China Top Brand. At present, China Adhesives Industry Association is committed to nurturing polyvinyl acetate emulsion, hot melt adhesives and other products as China Top Brand 4. Experts say the next few years, our adhesives and sealants market demand will continue at an average annual growth rate of more than 10%, of which hot melt adhesives, reactive adhesives annual growth rate of more than 12% . Most general-purpose product oversupply situation has not changed, and some high-performance, high-quality adhesives and sealing agents and the increasing demand for adhesive products, such as for Electronic Electrical appliances, precision instruments, automotive, aerospace and aviation industry products. The rapid growth of market demand and environmental regulations to enforce energy conservation, the future of some water-based, thermoplastic, biodegradable, light curing, room temperature and low temperature curing and solvent-free, high solid content type and other environmental protection energy-saving products , part of the modified type, reaction type, multi-function type and other high-tech products will have greater development and its growth rate will be higher than the adhesive product. Experts also issued a warning message to the business: part of the adhesive and sealant production capacity has exceeded market demand, market competition is very fierce, enterprises in the new or expanded projects to be very careful. These products include both general-purpose polyvinyl acetate polymer emulsion (white latex), Universal Building Acrylic ester and styrene copolymer emulsion, Universal -cyanoacrylate instant glue, in the low-speed wireless binding books with hot melt adhesive to BOPP (biaxially oriented polypropylene film) as the substrate for packaging acrylic ester pressure sensitive adhesive and tape, general purpose silicone sealant, etc.. In the next few years, adhesive industry will speed up the process to amend the standards of product quality, increase product quality supervision and inspection efforts to nurture and develop brand-name products to further expand the production scale, strengthen the scientific and technological innovation through competition out some small-scale production, low level of technology, poor product quality, environmental protection substandard backward enterprises, efforts to improve our product quality and grade adhesive. I am an expert from carreplacementkeys.com, while we provides the quality product, such as replacement car key Manufacturer , car key blanks, replacement car key,and more.
Related Articles -
replacement car key Manufacturer, car key blanks,
|
