|
Printing products and strong fashion, selective major, in a market economy most sensitive to merchantability or unmarketable. China's printing industry is only revolves around the global information technology, small-volume, fast delivery and competitive in the market such topics as the ecological balance in order to obtain sustainable development. Printed in China in 2001 produced 4.3 billion meters, the first in Asia accounted for, the main technical content of printed cloth production increased significantly, from an extensive and labor-intensive step by step into intensive and technology-intensive industries, the most notably copper roller printing machine has been rarely used, hand painted basically be issued to replace the computer CAD computer, greatly reduced labor intensity, a significant reduction in staff. In recent years, China's printing industry to introduce a lot of foreign advanced technology, and actively absorb and digest, developed a number of key facilities, encouraging results obtained are summarized in the new century and our major global technology development and prospects. Basic conditions of production Prints both technology products of industrial products is not only useful but also required good-looking, and consumers love and inseparable from changes in the market, and the global financial climate, economic prosperity is closely linked. In recent years, North American and European printing industry by the economic and ecological impact of various factors and constraints, one after another landslide in the local textile industry, printing industry continues to Asia and the Middle East, such as India, Pakistan, Turkey and other low-income, high-cost countries transfer Latin America's printing industry in North America and south under the influence, is in a good momentum of rise gradually. Only in Argentina by the national financial crisis, printing industry, not only lost a rare opportunity, almost stagnant, and even this part of the original industry also transfer to other countries. The global automotive industry and other emerging industries and high added value, profit, causing a calico industrial applications has been expanding worldwide in 2001, three types of textile end-use ratio: 54% fabric, decorative fabric 38%, industry 8% with a cloth. Asia, which mainly fabric-based, the proportion of 71%, mainly in Latin America accounted for 60% to upholstery, upholstery in the Middle East is mainly accounted for 72%, North America remained 50% of the upholstery. As the extent of national differences in standards of living and industrial development, industrial fabrics related to the proportion of large, North America industrial fabrics, such as 20%, other areas are not high, at between 5% -8%. Three types of products our estimates of 2000 the proportion of integrated fabric, 67% of 20% decorative cloth, industrial cloth of 13%. Worldwide from 1992 to 2001 decade, knitted fabrics and nonwovens has increased significantly, while the decline in large woven fabric, a reduction of almost 12%. Knitted fabrics, especially West Germany the market share of 22%, higher than the global average of 17% of the knitted fabric is also higher than 5%. Looking printing industry in the future development, several aspects of special attention: Printed width of a trend Global average of 177 cm width finished prints that 128 to 185 cm, the largest number of such width, 78%; 185-240 cm 9%; 240-320 cm 13%. Asia, with China as the largest number of representatives of 177 cm within a narrow range, mainly in Asia to the main fabric; Middle East, mainly to decorative prints, as the representative of Pakistan, from 280 to 320 centimeters or about 90%. Therefore, the width is and end-use, look at the overall trend from a global future Laborers Broadwoven conversion. Activity, Disperse Dyes Selling Well Global prints using dye mainly paint, active, distributed three categories, paint 45% in 2001 compared with 52% in 1997 down 7%; reactive 30% in 2001 to 27% compared to 1997 increased 3% ; disperse dyes used in 2001 compared to 19% to 17% compared to 1997 increased 2%, and increase in the use of polyester fibers. Technical requirements for higher printing paste Printing paste is the key to printing quality, but also lower costs and reduce pollution, an important part of good paste selection can not only outline a clear pattern of non-penetration, but also improve the depth and brightness, thereby reducing costs to save dye . Has always been a big water dyeing, bleaching and training account for the global printing pre-treatment water producing 50% -60% of water, while printing can not be ignored after the treatment of water, accounting for dyeing -30% 20% process water. Dyeing fabric dyeing relationship has always been on quality of fabric is very concerned about sizing, fabric sizing and printing pastes are similar, sizing should be beneficial to also take into account the textile dyeing and weaving process washable easy to retire, not only looking forward and regardless of later. This year a number of countries, fabric sizing using modified starch is rising, Asia-Pacific region followed by European and American use of starch sizing, as little as possible with or without chemical pulp, printing and dyeing mill without using oxidants help or alkali chemical pulp to stripping. Dyeing Similarly others have behaved should not impose on others, less printing chemical paste, active use of natural type paste, development and use less water and easy to clean, easy-to-degradation, help reduce energy consumption and reduce pollution of natural variability printing paste or paste. I am an expert from steelslittingmachine.com, while we provides the quality product, such as metal slitting cutters , China slitting and rewinding machine, steel slitting machine,and more.
Related Articles -
metal slitting cutters, China slitting and rewinding machine,
|
