|
Recently achieved through high-efficiency feed processing were well received. The Company has also complied with the market demand, launched high into the trunk to the new sks series. Material from rough to cut materials such as hardened steel, can use this product for efficient rough. The newly developed replaceable carbide head + Arbor (Super tough bar) series Tools Is has been well received. Processing tool to increase the suspended length, the knife had to reduce the vibration occurs Experience cutting conditions. Another blade wear not only because of lack of cause chipping, and the cutter body will greatly reduce the vibration of the anti-chipping of edge. Particularly in the absence of automated processing tool easily lead to death when the plane crash and other major incidents. Here, we introduce these issues to develop the company's new high-feed cutter body Series Shinkansen portfolio improvement measures taken. Carbide rod handle ultra-tough series 1, cutting Blades, long body overhang elongation occurs when vibration, impact cutting conditions, in particular, led to the cutting speed can not increase. Example: with the sks-2020-130-s20 (20mm diameter steel knife body), suspended length 190mm (l / d = 9.5), when processing s55c recommended cutting parameters: cutting depth of 0.3mm, cutting speed v = 80m/min, feed per tooth f = 0.6mm / edge, the feed rate f = 1500mm/min. However, the carbide Chuck (Super tough shot) msn-m10-140-s20 and high into the trunk to the new series with a replaceable head msh-2020-m10 used in combination, can achieve 1.9 times cutting speed v = 150m/min, each edge feed for the original 1.7 f = 1.0mm / blade, feed rate tripled f = 4800mm/min, and the vibration does not occur during the processing, cutting smoothly. In addition, when the processed material for s55c (201hb), using the blade type wdmw050316ztr of jc5040 material processing. Cutting parameters: spindle speed n = 2390min-1, cutting speed v = 150m/min, feed per tooth f = 1.0mm / blade, feed speed f = 4800mm/min, axial depth of cut ar = 0.3mm , radial cutting width ad = 12mm. Use a hair more cooling for life. Steel knife body at high speed, high feed conditions of use, as much vibration, chipping blade production, cutting to 25m long or can not use. The "super-tough shot" series of processing under the same conditions to 525m (cutting time 109 min) also did not produce chipping phenomenon was more than 21 times the life span. Increase when the suspension length, the use of "super tough shot" series, not only through high speed and high feed greatly improve processing efficiency and tool life to a large extent have improved. 2, processing of cases Use ¢ 32mmsks replaceable head + carbide arbor (super strong pole) process Forging Die With (heat-resistant Tool Steel), the processing efficiency, improve life examples. The machine hanging clip length 100mm round blade Mills The axial depth of cut ar = 1mm, feed rate f = 2800mm/min, cutting the amount q = 70cc/min, life expectancy is 45 to 60 minutes. Carbide Tool Holder (super tough bar) compared to processing conditions can improve ar = 0.7mm, f = 7000mm/min, q = 122.5cc/min, processing efficiency is improved by 1.75 times the life of 190 minutes, increased more than 3 times. Six years Hardware Special report: Click here Hardware six years: looking for landmark China Hardware Six years Hardware: Find Hardware Memory Looking back six years of trials and hardships hardware: hardware achievements largest industry (I) Looking back six years of trials and hardships hardware: hardware achievements largest industry (below) Hardware six years: find century-old Wang Mazi Scissors History Footprint Great country, six years of glorious course of development of hardware playback We are high quality suppliers, our products such as folding makeup mirror Manufacturer , lighted compact mirror Manufacturer for oversee buyer. To know more, please visits folding makeup mirror.
Related Articles -
folding makeup mirror Manufacturer, lighted compact mirror Manufacturer,
| 
