|
The LCD cover screen protector uses ultra thin optical glass and special processing. It is highly transparent and has anti-scrape, anti-bump, and anti-aging properties. Besides, it is easy to install. The LCD cover is a product compared to the PVC material screen protector. The thickness of this glass is only 0.5mm. Thus the level of transparency is guaranteed. Special coating is applied in order to strengthen the LCD screen protector. This prevents it from scratches. It is able to provide high level protection for your camera LCD screen. The LCD cover uses a 0.5mm ultra thin optical glass having at least 90% transmittance. It has a much higher transparency than any other LCD screen protector. It is as hard as 8H. This LCD cover can bear a heavy burden of 8kg per square cm. It can also prevent from being rubbed, scraped and bumped. This LCD cover is well sealed by 3M double side adhesive tape. This is not easy to be unglued and is very easy to be installed. There is no air bubble or angle that occurs during sticking on the equipment. It will not be affected by the temperature and humidity. This LCD cover prevents the LCD screen getting infected by sweat stain, smear, and acid or alkali element. This way it prolongs the life of the screen. It can easily be removed and reused in case the glue layer hasn’t been damaged. The LCD cover provides anti-scratch, anti-dust, anti-collision, moisture-proof, UV protection. Before putting the LCD cover, clean off the LCD with a microfiber towel and a glass cleaner. Now polish it off with the dry side of a towel to make sure that no smudges remain. Peel off the adhesive protector from the back side of the LCD cover glass protector. Now carefully align the corners of the LCD cover and the camera’s LCD. Compared to the cost of a branded plastic LCD cover protector, the glass protector is much more reasonable. There will not be a noticeable loss in brightness either. You will not really notice any changes in reflectivity. Unlike a soft LCD cover, you only get one shot to install a glass LCD cover correctly. You can turn on the LCD when lining up the LCD cover. Also make sure that the bottom right corner doesn’t protrude towards the 40D’s on/off switch. In case of a non-bendable LCD cover you won’t have to deal with air bubbles.
Related Articles -
LCD, Cover,
| 
