Installation, use cleaning techniques Daquan
BR Currently on the market
Product styles varied, dazzling, users will often choose a loss. But neither side deep suction machine type, machine washable to avoid or European machines, buy smoke
The key is to understand its performance, use the following three key performance indicators to reflect:
BR Static pressure air flow is zero range hood exhaust volume per unit time. Air flow is a very important indicator, generally the greater the wind value, range hood range hood's ability to become. So the user in the selection of range hoods, when other indicators are a good case, as a large selection of wind-money range hood.
BR Countries require the index value is greater than or equal to 7m3/min.
Hood air flow usually in the 13 ~ 15m3/min, up to 18m3/min, the wind was greater than normal brands.
BR Pressure is the hood when the wind is 7m3/min static value. Pressure is also a measure of hood performance is an important indicator. Pressure values greater capacity Range Hood lodging stronger wind. If a longer exhaust pipe or flue in receiving the public, then the exhaust gas pressure loss greatly, thus requiring greater pressure to ensure that the flue gas exhaust. So, when other indicators are good cases, the greater the pressure the better the value.
BR Countries require the index value is greater than or equal to 80Pa. Shuaikang brand range hood air pressure up to 330Pa, wind pressure is greater than normal brands.
BR Noise is also a measure of the performance range hood is an important technical indicators. It refers to the range hood in the rated voltage, rated frequency, to a maximum speed of file operation, the required method of A measured sound power level.
BR For this indicator, the user knows, the less noise the better. States require the index value is not greater than 74dB, while the Shuaikang sound pressure value is less than 54dB. (Note: sound power value = sound pressure level +14 dB)
BR Hood optional installation, use cleaning techniques Daquan
BR Range hood installation location, height and the air duct to the choice of good or bad, can affect the visual effects of smoke suction hoods. Smoke fumes to get better results, installation can refer to the following criteria:
BR 1, range hood should be installed in
A position just above the center of its bottom surface and the distance between the gas stove should be 650mm? 750mm range.
BR 2, try not to make hood installed in the doors and windows near the strong air flow, so as not to affect the soot absorption effect.
BR 3, the air duct should not be too long, preferably not more than 2 meters and to minimize bending, avoid bending over 90 degrees, otherwise the smoke will affect the absorption effect.
BR Hood use common sense
BR 1, when used, should normally be 1-2 minutes start to open gas stove smoke. Application of high-speed file Startup the best start, start after the changes according to the size of the kitchen smoke high-speed or low speed.
BR 2, gas stoves should be below the hood, smoke the best.
BR 3, smoke gas stove should be done after the closure of rice continue to work 3 minutes or longer to ensure that the room air renewal time.
BR 4, when used, from the smoke close to the windows should be locked, the door opened a crack, to prevent the formation of relatively large air flow, and can replenish the air inside the kitchen. I am a professional writer from China Print Net, which contains a great deal of information about install oil tank , propane tank sales, welcome to visit!
Related Articles -
install oil tank, propane tank sales,
|
