|
Wakeboard ballast is the weight added to your boat to enable it displace more water hence you can achieve a higher lift. It is a simple concept, the more the weight you have, the bigger the size of your boat which translates to the higher lifts anyone taken to wakeboarding dreams about. This is because, wakeboarding is all about the size of your boat and how you can maximize it fully to give you your desired performance. In as much as skill and technique are useful, their effect is limited when it comes to attaining those high lifts. You are therefore better off finding the most suitable wakeboard ballast to give your wake the extra push. There several types of ballast systems in the market and are in two broad categories. These are water ballast systems and solid ballast systems. Most commercial ballast systems make use of water. The water systems work by having water pumped into bags or sacks which are placed inside the boat. This kind of ballast systems are the best option as they are safe and convenient to work with. If you can afford them they should be a perfect choice. Some modern boats come with automated ballast systems that allow you to empty and fill the bags with ballast just by pressing a switch. However, there are those that will require you to get a separate pump to do the work. In case you cannot get the cost of water ballast systems then you can make use of solid ballast. This involves the use of lead weights and sand. They are placed in bags or sacks and then loaded into the boat. With hard material ballast, you can use virtually anything that can add weight to your boat. The choice of whether to go with water or solid depends on your budget and convenience. Whereas water ballast will give you the latter, solid ballast is more affordable and will guarantee you some flexibility. Another interesting form of wakeboard ballast would be to use people. They are not only free but also, they are easy to move unlike sand and lead weights. Like anything else, there are limits when using weights. You should take care not to overload the boat as this could lead to flooding of your boat. You can get the right weight by checking on the USCG sticker on your boat that clearly outlines the maximum weight your boat can take. Another thing that is crucial in using wakeboard ballast is the positioning of the ballast on the boat. Proper positioning allows you to have greater performance. You should check to ensure you have achieved balance from the front to the back of the boat. How this works out greatly depends on your type of boat and its size. Some general guidelines will be to ensure the port and starboard are equally balanced. More weight should be placed at the back to attain smooth movement but should not be far heavier than the weight of the front. This calls for a lot of experimenting and patience to find the best solution. If you need more information about wakeboard ballast or just looking for beginner wakeboarding tips, the best portal of information actually is readily available online!
Related Articles -
beginner, wakeboarding, tips,
| 
