With economic development and people's material living standards, environmental protection and energy has been widely accepted by ordinary people and use solar energy as a clean renewable energy gradually into people's lives. At present, the widely used Solar water heaters Is one of them. Solar Water heater As the adoption of heat needed, often without shelter installed in the roof height. However, we found, the large number of solar water heater installation is not considered for lightning protection, which left a lightning strike hazards. When summer came, the use of solar water heaters into the peak, which is what lightning-prone season, no doubt to the people's lives and property caused by the potential threat, once the solar water heater has been struck by lightning or lightning sensor, heater liable to damage, the current through pipes, wires and other introduction of the indoor, directly endangering the personal safety of users, lead to disastrous consequences. This year, farmers in Huzhou roof solar water heater without a lightning protection measures, has been directly struck by lightning, damaged roof, solar water heaters and flat cables and equipment damaged in varying degrees, causing property damage, fortunately no casualties. That how to make solar water heater in the thunderstorm season, safe and reliable to use it? This must take lightning protection measures for solar water heaters. Lightning center, according to City experts recommend: One, no mine facilities in the building for installation of solar water heaters: mine design should be invited to have a professional qualification in the unit to its lightning protection system design, design center should be entrusted to a local mine, mine design techniques conducted review of construction, installation must be carried out after the completion of acceptance testing, be put into use after passing the test. Second, if the building has been installed and tested mine facilities meet mine specifications: When the solar water heater installation location is already in the existing lightning protection device within the scope of solar water heater is simply a metal bottom feet with flat or round the nearest roof lightning protection device (lightning with or deflectors) can be a reliable connection; if the solar water heater installation location is not in the context of lightning protection devices should be installed at the water heater near the single or multi branch lightning rod, lightning rod to protect the entire water heater placed within the nearest foot bottom and water heater and roof lightning protection devices and reliable connectivity. 3, solar water heater installed in the roof of the power cord, signal cable should be shielded to protect metal tube: tube top with metal roof lightning protection device is connected to the bottom and the bathroom bonding within the local terminal. Best to install the power supply line arrester and ground wire to the protection of the bathroom (PE line) and the local bonding terminals are connected, on the one hand to prevent lightning damage flowing through the solar water heater solar water heater pipe heating, water level and temperature monitoring display system ; the other hand, prevent the lightning current through the power line fleeing into the power system, damage to other household appliances. 4, in strong thunderstorms occur, should avoid the use of solar water heaters: go out to unplug the heater when the power plug is best. In short, the solar water heater is economical and convenient, and energy-efficient environmental protection, favored, the widely popular, but only really good lightning protection measures of solar water heater, so you can rest assured in the thunderstorm season, safe to use. The e-commerce company in China offers quality products such as Linear Actuator Controller Manufacturer , China Heavy Duty Linear Actuator, and more. For more , please visit Industrial Linear Actuators today!
Related Articles -
Linear Actuator Controller Manufacturer, China Heavy Duty Linear Actuator,
|