Cable ties have been used to attach the shade cloth to the scaffold at a construction site in Singapore
In its most popular form, a cable tie consists of a sturdy Nylon tape with an integrated gear rack, and on one end a ratchet within a small open case. Once the pointed tip of the cable tie has been pulled through the case and past the ratchet, it is prevented from being pulled back; the resulting loop may only be pulled tighter. In two of its most common uses, this allows several cables to be bound together into a cable tree, or to be used as makeshift handcuffs as in Panam, the U.K. and the U.S.A. Specially constructed physical restraints called PlastiCuffs, based on the cable tie design, are used by police and military to restrain prisoners, especially in the more urban parts of the U.S.A. and Panam. Cable ties are also commonly used to prevent hubcaps (also known as wheel trims) from falling off a moving vehicle, and some are sold specifically for this purpose.
A cable tie tensioning device or tool may be used to apply a cable tie with a specific degree of tension. The tool may cut off the extra tail flush with the head in order to avoid a sharp edge which might otherwise cause injury.
In order to increase resistance to ultraviolet light in outdoor applications, a specific grade of Nylon containing a minimum of 2% carbon black is used to protect the polymer chains and extend the cable tie's service life. Blue cable ties are supplied to the food industry and contain a metal additive so they can be detected by industrial metal detectors. Cable ties made of ETFE (Tefzel) are used in a radiation-rich environment. Red cable ties made of ECTFE (Halar) are used for plenum cabling.
Stainless Steel cable ties are also available for flameproof applications - coated stainless ties are available to prevent galvanic attack from dissimilar metals (e.g. zinc coated cable tie).
Cable ties were first invented by Thomas & Betts, an electrical company, in 1958 under the brand name Ty-Rap initially designed for airplane wire harnesses. The original design used a metal ratchet instead of nylon, they later changed to the nylon/plastic design.
Cable ties are generally viewed as single-use devices. However, if a closed loop needs to be opened again, then, rather than destroying the cable tie by cutting, it may be possible to release the ratchet from the rack to reuse the cable tie. While some cable ties are designed for reuse with a tab that releases the ratchet, in most cases a sewing needle or similar object (for example a small screwdriver) will need to be interposed between the ratchet and the rack. Ties reused in this way will be weaker than new ones.
To open without cutting it, the ratchet box can be crushed vertically using pliers.
Other methods of bundling cable together securely and semi-permanently include cable lacing, binding knots such as the surgeon's knot or constrictor knot, Velcro brand hook-and-loop strips, conveyor belt hooks, twist ties, Rapstrap fasteners, metal buckle clips or Cablox cable management.
Primaq - Cable Ties, , retrieved 2009-06-08
Thomas and Betts official website.
Wikimedia Commons has media related to: Cable ties
History of Cable Tie
Some Images of Cableties I am a professional writer from China home garden manufacturers, which contains a great deal of information about venturer dvd portable player , sandisk extreme iv compactflash, welcome to visit!
Related Articles -
venturer dvd portable player, sandisk extreme iv compactflash,
|
