To further improve industry standardization, standardize procedures industry standards, according to "The People's Republic of China Standardization Law" and "The People's Republic of China Standardization Law Implementing Regulations," the relevant provisions of the industry combined with our commission to carry out standardization work in recent years actually, the National Development and Reform Commission formulated the "National Development and Reform Commission to develop management practices industry standards" (hereinafter referred to as "measures"), to better guide the industry standard. The "measures" from the industry standard project development process, drafting, review, approval, announced the approval, publishing, review, revise, and revise the provisions were unified in effort to standardize the formulation of industry standards harmonization.
The "measures" have been the National Development and Reform Commission discussed and adopted by the director's office is in the implementation of the normative document.
Annex: Management practices industry standards Chapter I General Provisions The first to regulate the industry standard-setting work, according to "The People's Republic of China Standardization Law" and "Standardization Law Implementing Regulations," the relevant provisions formulated.
Second These measures apply to light industry, textiles, ferrous metallurgy, nonferrous metals, oil and gas, petrochemical, chemical, building materials, machinery (including boiler and pressure vessel, pharmaceuticals and equipment), automotive, electric power, coal, gold, packaging , commercial, logistics and rare earth industry standards.
Third industry standard is the absence of national standards in a certain trade need to be unified technical requirements (including construction, standard samples of production). Industry standards shall not conflict with the national standards. Should be coordination between the industry standard, unified, and not overlap.
Industry standards, we must uphold the principles of the new road of industrialization and scientific development concept to market demand-oriented, focused, scientific and rational; develop industry standards for effective use of international standards and foreign advanced standards, is conducive to participation in international competition conducive to rational use and conservation of resources, development of circular economy is conducive to protection of human health and safety, environmental protection, and industrial policies, industrial planning coordination is conducive to the promotion of scientific and technological achievements, promote industrial upgrading and structural optimization.
Article industry standards, including project planning, drafting, review, approval, announced the approval, publishing, review, amend, modify and so on.
Article industry standards by the National Development and Reform Commission (hereinafter referred to as the National Development and Reform Commission) management. National Development and Reform Commission commissioned Industry Association (Association), the industry standard unit of state planning (hereinafter referred to as straight uniform industry standards bodies, the specific list, see annex I) on the process of drafting industry standards, technical reviews, code, approval, filing and publishing the work of management. Li Xiang
Chapter Article VI project to develop industry standards, by the National Development and Reform Commission is responsible. Article
any government agencies, industry, social organizations, enterprises, institutions and individuals are eligible to apply industry standards project (hereinafter referred to as applicants), and fill out the "industry standard project tasks book" (see Table 1).
Article VIII the industry standard project application by the Standardization Technical Committee or under the jurisdiction of institutions (hereinafter referred to as the standard uniform technical focal point) to receive, by standard techniques focal point Shenchahoubao sent straight pipe industry standardization bodies.
Article straight pipe industry standard technology standardization bodies submitted focal point for industry-standard project review coordination submitted to the State Development and Reform Commission.
Submitted materials include: 1, the industry standard project planning matrix (see Table 2);
2, the book industry standard project tasks;
3, programming instructions (including the basic situation of planning, the preparation of principles and priorities, etc.).
The state Development and Reform Commission on the straight tube submitted by industry standards bodies to develop industry-standard project summary of the applications, the standard network ( www.bzw.com.cn ) A month on the publicity and extensive comments. After comments, the National Development and Reform Commission Organization industry standardization bodies straight to coordinate and prepare industry-standard project plan.
Article industry standard project plan into annual plans and supplementary planning, unified issued by the National Development and Reform Commission.
Article XII in the implementation of industry standard project planning process, the need to coordinate and solve problems, are among the industry professionals, direct management by the industry standardization bodies; are among the industry, by the National Development and Reform Commission is responsible for .
Article XIII of the State Development and Reform Commission issued the industry-standard project plan need to be adjusted according to actual situation, straight pipe industry standardization organizations can apply for adjustment. Adjust the project plan need to fill out the "industry standard project plans to adjust the application form" (see Table 3). Directly before the end of each year the industry standardization bodies to the previous year the implementation of plans and project plans to adjust the application submitted to the National Development and Reform Commission.
Drafting Chapter Article XIV of the industry standard by the Standards Organization of the drafting of technical focal point.
Article XV industry standard drafting units shall be the applicant project requirements, organize research, production and other aspects of the user set up a working group in drafting personnel.
Article XVI prepared to be consistent with industry standards GB/T1 "the work of standardization," and the preparation of requirements related to industry standards. Article XVII drafting industry standards
draft, the preparation should be prepared by the standard instructions, which usually include:
1, a brief course of work, tasks are the main source and the working group members to participate in such units;
2, the industry standard principles and main content of the preparation, amendments to standards and the original standards should be set out the main differences and reasons;
3, using international standards and advanced foreign standard conditions, and international level of similar foreign comparison of the standard;
4, the main test to verify the situation and the expected results;
5, and the existing laws, regulations, policies and coordination of related standards;
6, implement standards and measures; 7, repeal the existing industry standards;
8, an important part of the interpretation and other matters should be explained.
The 18th completed the drafting of Article industry standard, the standard technical focal point should solicit the views of the draft standards, and fill out the "industry standard treatment table summarizes comments" (see Table 4), the industry standard manuscript form. I am an expert from China Hardware Suppliers, usually analyzes all kind of industries situation, such as netgear 5 port switch , integrated 10 100 ethernet.
Related Articles -
netgear 5 port switch, integrated 10 100 ethernet,
|
