Did you know that the demand for new air conditioner installations actually dropped in 2010? According to the Heating and Air Conditioning Industry report published by IBISWorld in April 2011, while new installations declined in the US, the demand for repair and maintenance increased through 2010. These figures, however, might not reflect the demand in Austin for air conditioning, given the typically hot climate of the region. The humid, subtropical climate in Austin, Texas, completely justifies the extremely pressing need for AC repairs. The ability of the AC unit to dehumidify and extract heat from an area is a blessing for the people living in hot areas. Depending on the usage, many types of AC units can be used. To maximize the output of the unit, the correct type for your specific needs should be installed. The 5 Types of Air Conditioning Units Window unit/Through wall unit: This type of air conditioning unit sits in a window or a wall opening, has interior controls and basically draws heat out of an area into the environment. Its use is limited to relatively small spaces. However, if multiple AC units are being used in a big area, it can raise the cost of installation dramatically. The window unit can be of two types: (1) Unitary (2) Packaged terminal AC (PTAC) Evaporative cooler: These are also called swamp coolers or desert coolers. They help bring the temperature down during hot weather. They work on a simple principle of using a large sponge soaked in water for efficient cooling. These coolers cost much less than the other types of Austin air conditioning. Also, their mechanism is simple to understand and easy to maintain. Absorptive chillers: These units remove heat through the absorption refrigeration cycle. Chilled water is distributed to coils or other devices in which the cooling takes place. Portable ACs: There is no permanent installation of this type of air conditioning unit. It has several easily movable elements that are used for cooling a particular area. It is very easily installed and has aesthetic appeal, which the other types of AC units lack. Central ACs or central cooling units: This type of AC unit is used for very large spaces. It has a duct system, which provides duct distribution of cool air. It can also be used for more than one room if you want the cooling controlled centrally. It has a lot of additional benefits over the typical AC unit. Air conditioning in Austin, Texas, is of fundamental importance. Not only do the units cool the inside environment, but they also help a lot of people cope with the climatic drawbacks of living in Austin. To extract the benefits of an AC unit, it is important to maintain its quality over time. Air quality and efficient cooling can only be achieved through regular maintenance of the machine.
Austin Air Conditioning - Indoor Weather Professionals is a company of factory-trained experts who are proficient in all makes and models of air conditioning equipment. With their 24-hour service and positive attitude, they offer solutions for all your air conditioning problems. Visit them at www.indoorweatherpros.com.
Related Articles -
indoorweatherpros.com, austin appliance repair, austin appliance service, austin appliance, austin appliance repair services,
|