|
Maintaining your hardtail or full suspension mountain bike can be not difficult and even satisfying. Besides, knowing how to do it correctly will make your bike more durable and functional. Further, you’re offered a few important tips on keeping your mountain bike mechanically sound and avoiding possible problems. After you learn these tips taking care of your mountain bike will take less than twenty minutes. So, these are the tips: Remove all accessories on the higher part of the handlebars including bells, lights, etc. Then turn your mountain bike upside down in order to remove the wheels and check the drive train. Attentively remove the front and rear wheels. This will give you more space while working on the bike. Further clean the drive train including chain, derailleurs, and crank with the help of a brush and soapy water. To clean the chain and rear derailleur it’s recommended to use a wet soapy rag. Thoroughly clean all moving parts of the bike. After cleaning all parts of your bike dry them thoroughly with the help of a towel to avoid further rusting. Wash the underside, frame and front fork, of the bike and make sure all moving parts are free of debris. Wash the wheels by cleaning the spokes, rim, and cassette. After cleaning the wheels properly put the wheels back on your bike. After putting the wheels back on your bike you should spin them ensure that the wheels are located correctly and don’t rub on the brake components. If you have noticed some problem, make the needed adjustments. After you have put the chain in its place turn the pedals for ensuring that the drive train works correctly. Besides, the bike’s pedals should be smooth. If there’re some strange noises heard from your wheel bearings explore this part of the bike further. Turn the bike right side up and wash its upper part. Always dry the bike thoroughly. Check up the front and rear brakes carefully. If necessary check up the front and rear shocks as well. They should function in the proper way. Lubricate you drive train as well as chain, crank, cassettes, and derailleur with the necessary oil. Oil should be applied during the movement of the pedals in both directions. If the movement is smooth it means that all the components are appropriately lubed. At last, reattach all accessories that were removed in the very beginning of your inspection. These tips are going to assist you in taking care of your mountain bike correctly and to increase its service to you. Check your bike before each serious ride. Pay attention to the smallest mechanical malfunction of your bike in order to avoid possible problems which can cause serious injuries. If necessary you can find different bike parts at your local bike shop the assistants of which will gladly help you to replace any bike’s component. Caring for a freewheel or cassette can seem a rather difficult task at first. These components should be regularly cleaned from possible dirt and grime in order to make your riding pleasurable. The buildup of mud or dirt can block the chain and even cause premature wear for different parts of the bike. In order to clean the freewheel or cassette it should not be removed. So, cleaning the freewheel or cassette, use the following pieces of advice: 1. Take off the rear wheel from your bike in this way getting better access to the cogs. 2. Too dirty freewheel or cassette needs to be thoroughly washed with soapy water, however, don’t spray water directly, it’s better to use a brush. 3. You should use a rag if the freewheel or cassette isn’t too dirty. The cloth or brush should be dipped in degreaser before the usage. 4. In order to remove dirt trapped between the cogs, a narrow brush or a screwdriver should be used for scraping it out. You can also find specially designed tools for this purpose at the stores. http://sellerby.com/good_7588_457359617-SHIMANO-DURA-ACE-CS-7800-10SP-CASSETTE.htm
Related Articles -
Cassette, Correctly,
| 
