|
Most rc models consist of specific systems. To ensure top transmission, modelers need to revise every part. This provision is an important niche for the radio control car receiver, which itself is a delicate, in front where it will accommodate foam wrapping. A good foam protection is the tube heating insulation to meet in special establishments. Lifted, this tube is in many diameters, is sufficient to choose one per. This flexible package is attached to the floor of the fuselage with Velcro strips. Concealed antenna The radio control car antenna is generally placed outside, you must install the fullest extent possible, so much so that the receiver will get optimal performance if it is fully extended, since the receiver is adjusted for the number of antenna cable has installed. If the antenna bends and folds form, the total length thereof is shortened and thus the receiver performance is lower, this performance loss is not apparent to loss of length. Consider a twenty percent, but if we make the mistake of letting perfectly coiled antenna inside our plane the consequences will be fatal. For a time it was fashionable vertical antenna radio controlled planes, now this practice has been abandoned since the quality of existing radio equipment allows a large number of freedoms in their use. The current trend is to install the antenna inside the fuselage of the plane. To install the antenna inside the fuselage is assembled in advance enough to have a plastic tube inside the cable to slide the antenna. Servos secured It is pointless for our radio control car servo manufacturers to strive to provide us with a high precision mechanical servo, high strength and stiffness if we assemble in any way on their racks. The servos should be installed in a rack strong enough, you can use the supplied plastic frame some manufacturers, but these racks that are very practical when the radio switch from one model to another nevertheless need a frame to in turn. We are more in favor of the fixed frame to the fuselage, easy to do with the scheme presented, light and strong and in turn participate in the resistance of the sidewalls of the motor. A firm attachment does not mean, however, a rigid fixation, the servo is also an element with a sensitive electronic although it is not as much as the radio control car receiver. Learn top tips n ensure endurance.
Related Articles -
Radio, control, car,
| 
