|
Jaw crusher is one of the most popular stone-crushing equipments in the world, Jaw Crusher is ideally suitable for primary and secondary crushing. The highest anti-pressure strength of crushed material is 320MPA. Our design and production are of high position both at home and abroad.
PE.PEX Series Single Toggle Jaw Crusher has the features of great crushing ratio, uniform sizes of promance. It can be used to crush material its compressive resistance not more than 320 MPA. It is widely used in various industries, such as mining, smelting, road and railway construction and chemical industry etc. PE Series is used to primary crushing; PEX series is used in secondary crushing and fine crushing.
Impact Crusher is our latest generation of product with the international advanced-level quality,which is designed and produced based on Liming Heavy Industry absorbing the latest technology of impact crusher in the world.
European Type Impact Crusher is equiped with heavy rotors. Since the rotor is the “heart” of the crusher, and is the strictest part in the impact crusher during checking and accepting process as well as is very crucial during working process, we developed and produced the heavy rotors with the firm structure to obtain higher inertia moment. And High abrasive materials and the best crushing cavity enable the impact crusher of excellent performance.
The impact crusher with two crushing cavities can simplify the process flow in the coarsely -medium crushing operation process. While the impact crusher with three crushing cavities can be used in the fine crushing and ultra fine crushing.
This type of impact crusher use impact energy to crushing the materials. When materials enters the working area of plate hammer, they are impacted then crushed by plate hammer at a high speed, and are thrown into the impact device installed at the upper part of the rotor for re-crushing, then rebounded into the working area of plate hammer from the impact scaleboard for re-crushing. This process is repeated until materials are crushed into demanded granularity and are discharged from lower part of the machine. The granularity and the shape of the materials can be changed by adjusting the gap between the impact frame and the rotor shaft. Spring safety device is adopted behind impact plate of the machine. When non-broken materials enter the crushing cavity, the front and rear impact frame fall back, and then the non-broken materials are discharged from the machine.
With its high quality products such as Concentrator table?Iron ore concentrator?China spiral classifier?Henan Hongxing mining machinery Co.Ltd has ascended in the front rank of the world in the exporting of mining equipments.
Related Articles -
science, technology,
|
