|
A newel post is classified as a hefty square pole usuallyspotted at the top or bottom part of a flight of stairs. They are twisted, paneled, pointed, channeled or designed. There are two styles of of newel posts: turned, which are made of solid wood and decorated, and boxed, which are made of hollow wood with a cap at the top. Technically, they are designed to support the handrails, but they come in many designs to bestow charm and exquisiteness to the stairs. Boxed newel posts are taken into consideration when handrails are not important. Plain box newel, flutter box newel, mission panel, recessed box panel, raised panel box newel are some of the patterns offered for boxed newel posts. A turned post is featured instead of boxed newels when space is not available. There are actually various kinds of custom newels and iron newels available for purchase. Newel posts are obtainable as full newels, which the whole pole is made from a single piece of wood together with the base; and pin newels, which are used when the pole and base are different. A Post-post structure is utilized when handrails are fitted in in between the newel posts, while an over-the-post system is employed to provide continuous handrails without interruption. Boxed posts use a post-post system while pin newel posts are chosen for over the post. Kinds of Wood To Utilize The wood ideal for designing newel posts must always be of good quality and possess good enough length. Usually oak, maple, pine, cherry and alder are used to produce them. Oak wood has got exceptional toughness and hardness, and makes elegant fixtures. It is also able to resist fungal attack. Cherry wood is heavy and sturdy, and when refined gives a deep, rich, red color. Maple, alder and cherry are tight-grained and are smooth to the touch when polished. Mahogany and ash are also used for their hardness and strength. Setting Up Technically, a newel post consists of 3 sections: - The top tread of first section.
- Nosing for landing.
- The bottom tread of next section.
Procedures to Follow for Installing - Measure the tread of the stairs on each landing.
- Setup the post based on the level preferred.
- For the ballisters, first decide how many are required. Then minimize the top at an angle parallel to the angle of the stairs.
- For the post, mark the spot to drill the power screw on the two of them its top and bottom.
- Drill the power screw so that the newel post is attached to the floor. Put on wood glue.
- Put together the handrails by applying wood glue and drilling the screws on the underside of the rails into the newel post.
- Connect the ballister and the handrail. See to itthat they are level!
- Finish the stairs and ensure that they are sturdy.
- Frequently oil the newel posts after construction.
Custom Newel Posts Custom newel posts contributebeauty to any staircase. Many people would prefer to have them to represent their personal type or furnishings of their house. They are frequently intended to fit the interior of the home. Custom newel posts are presented in many distinct styles like conventional, Victorian, modern, colonial, Georgian, and federal, from classic to contemporary. They can be molded beautifully or bedecked with jewels to give a rich appearance. For custom newel posts, the wooden cap on top of the pole can be engraved to illustrate a flower, fruit, bird, face, or any other elaborate styling. Find the right Custom Newel Posts that match your decor ideas and your unique style. Click on the following link to choose from a huge selection of exquisitely Carved Newel posts. The quality and beauty of your newels is guaranteed.
Related Articles -
custom newel posts, carved newel, boxed newel,
|
