|
Stone crusher is suitable for crushing materials with particle size more than 3mm. According to the difference between feeding opener and output sizes, they are usually separated: primary stone crusher, secondary stone crusher (medium crusher) and fine stone crusher. HONGXING stone crusher can used as slag crusher, quartz crusher, lime stone crusher, granite crusher, iron ore crusher, marble crusher and so on.
Spring Cone crusher is suitable to crush various kinds of ores and rocks of medium or above medium hardness. Compare with jaw crusher, spring cone crusher is of stable structure, high efficiency, easy adjustment, economic operation, etc. The spring cone crusher acts as an overloading protection system that allows metal to pass through the crushing chamber so as not to damage the cone crusher. The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separate to make sure reliable performance. The type of crushing chamber depends upon size of feeding and fineness of crushed product. The standard type (PYB) is applied to medium crushing, the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.
Stone crusher is widely used in mining and construction industry, metallurgy industry, building material, highway, railway, water conservancy, chemical materials and many other departments, the HONGXING stone crusher contains PE jaw crusher, PEX jaw crusher, PF impact crusher, cone crusher, VSI crusher and mobile crusher. The stone crushing units can be seen in the vicinity of almost all major cities and towns.
Stone crusher features large crushing rate, high yield, equal product size, simple structure, reliable operation and easy maintenance, economic operating costs etc.
Stone crusher is segregated into various sizes like 35mm, 20mm, 12mm, etc for different uses. Stone crusher aggregates are used for construction of roads, bridges, housing, industrial building construction and other cement based products like RCC pipes, PSC poles, pre-molded slabs, frames and beams, etc for fabrication. It is advantageous if the Stone crusher unit is set up near the quarries where the granite boulders of various sizes are available for the crushing unit. The wastage from the granite industry will be of much use to the Stone crusher unit.
Related Articles -
society, culture,
|
