|
When and Why the Conversion of Timber Cooling Tower to FRP Cooling Tower is required? To maintain the performance of timber cooling tower you have to repair the damaged parts. If the timber cooling tower expired / damaged completly you have to go for new one. With out going for new timber cooling tower replacement of damaged parts only Problems with timber cooling towers: Timber structure may broke, bend and twisted. The fungal decay and algae depoit is also lead to the decrease the performance. Methods of conversion of timber cooling tower Replace or repairing the timber cooling tower according to its condition. If the damages are more then it may required replacement of new timber cooling tower. You may go for Pultruded structure and components to fix the damaged parts. Design: Structured designed and connected to ground We used stainless steel at all places where ever required. Pultruded FRP Cooling Tower: Pultrusion technology of manufacturing of fiber composites with polymer matrix appears to be energy-efficient and resource-saving. Advantages of Pultruded FRP Cooling Tower 1. High strength composites at a low cost. 2. FRP pultruded products are often stronger then a similar product 3. Life time is more than 10 years. 4. Handling and transportation, installaion is quite easy. 5. It will never corrosive. 6. Hardness of water will never affect the structure / material / surface. 7. It will not get fired, climatic changes and suitable for power plants, oil industries, chemical industries. 8. Advantages of coverting timber cooling tower into frp cooling tower 9. Life time is more than 10 years. Timber Cooling Towers Manufacturer INDIA Coimbatore cooling towers is the leading manufacturer of timber type cooling towers.It is mechanical strength, durability and high efficiency. Manpower with vast specialized experience in cooling tower manufacturing is back bone of the organization. We have with us persons who have been entirely responsible from concept to final product manufacturing. We have major time tested development that has been incorporated in standards. Our CCT timber cooling towers are atmospheric cooling tower and mechanical cooling towers. Atmospheric towers are only for smaller capacities and mechanical draft towers are for higher range. Induced draft cooling towers are efficiency and popular due to sucking of air from the tower and exhaust at the top or side. The timber cooling towers are made out of pine or chirr wood after properly seasoned and chemically treated with arsenic chromate to with stand its life against biting, fungus and termite etc. For more information on Conversion of Timber Cooling to FRP cooling Tower visit our website.
Related Articles -
Conversion of timber cooling to frp cooling tower, timber to frp cooling tower, conversion of timber cooling tower, pultruded frp cooling tower, timber to,
| 
