|
 |
 |
Child school bus passenger area should be flat floor structure by jodie mht
 |
|
 |
Child school bus passenger area should be flat floor structure by JODIE MHT
|
 |
Article Posted: 05/07/2012 |
Article Views: 52 |
Articles Written: 1547 - MORE ARTICLES FROM THIS AUTHOR |
Word Count: 559 |
Article Votes: 0 |
|
Child school bus passenger area should be flat floor structure |
|
|
|
Automotive
|
 |
The side window of the passenger area at least the lower part of the half should be closed, and all the visible light transmittance of the window glass should not be less than 50%, and may not be posted opaque with specular reflective material and color on paper or thermal paper. Child school bus passenger area should be flat floor structure, in addition to the local structure protruding wheel covers, manhole covers, etc. not have steps on the floor. Riding area, neck area and Approach Road area of floor covering layer should be non-slip, wear-resistant. GB of the school bus regulations, a dedicated school bus should be sprayed in line with the school bus logo GB requires the appearance of a dedicated school bus identification. Implemented from January 1, 2010, "school bus logo" GB, school vehicle identification should include dedicated school vehicle body appearance logo, school bus signs, school vehicles docked notice signs, school bus stops site logo and school car docking station standard line. The appearance of the body identification of dedicated school bus school bus signs, "School Bus" in Chinese characters, Chinese characters of "nuclear seating: × ×", the number of school bus and school bus outline logo. The Chinese character "school bus" color red white edge, the font for the Chinese amber, the character "school" and "car" high as 300 mm, width 300 mm, white border width 12 mm. The Chinese character "school bus" is located in the front windshield of the blank central character spacing is not more than two fifths of the width of the school bus. School bus should be in the top of the vehicle before and after the installation of two yellow school bus marker lamps, front marker lamps and the front of the roof from the edge of not more than 40 cm; post-marker lamps and roof of the rear edge of the distance should not exceed 40 cm. The lamps should be a circular transparent shade and 360 ° around its vertical axis luminous. School bus marker lamps should not be higher than the upper surface of the roof skin 20 cm. School bus in the car confining plate outer surface of the rear of the vehicle close to the area can be seen, clearly marked "waiting" and "When the stop sign extended" red ". "When the stop sign is extended" word should stop waiting for the words below; "waiting" height should be at least 20 cm. "When the stop sign extended," the "height of at least 13 cm. If you can not be natural ventilation should install a forced ventilation device. The composition of the air inside the vehicle should be specified. Allow the use of sterilization, and the elimination of harmful gases function air purification device to achieve the air quality requirements. Mark time: Main products: car dvd player, car gps and car dvd are with good quality.the car pedal is not higher than 35 cm The state of the vehicle curb weight from the ground to the passenger door of the first level of the stepping height shall be not greater than 35 cm, other levels of stepping in height should not exceed 25 cm. A stepping depth of the light dedicated school bus should not be less than 23 cm, medium-sized private school bus shall not be less than 30 cm.
Related Articles -
car, dvd, player,
|
Rate This Article |
|
 |
|
Do you Agree or Disagree? Have a Comment? POST IT!
Reader Opinions |
|
 |
|
|
|
 |
 |
 |
Author Login |
|
 |
Advertiser Login
ADVERTISE HERE NOW!
Limited Time $60 Offer!
90 Days-1.5 Million Views

 |
 |
TIM FAY
After 60-plus years of living, I am just trying to pass down some of the information that I have lea...more
|
 |
 |
 |
 |
LAURA JEEVES
At LeadGenerators, we specialise in content-led Online Marketing Strategies for our clients in the t...more
|
 |
 |
 |
 |
ALEX BELSEY
I am the editor of QUAY Magazine, a B2B publication based in the South West of the UK. I am also the...more
|
 |
 |
 |
 |
STEPHEN BYE
Stephen Bye is a fiction writer. His most recent novels are a 5-book “The Developer” series which be...more
|
 |
 |
 |
 |
PAUL PHILIPS
For more articles, blog messages & videos and a free e-book download go to www.NewParadigm.ws your p...more
|
 |
 |
 |
 |
LEVAL AINAH
I am an internet marketer and also an educator. My goal is to help others who are looking to improve...more
|
 |
 |
 |
 |
GENE MYERS
Author of four books and two screenplays; frequent magazine contributor. I have four other books "in...more
|
 |
 |
 |
 |
ADRIAN JOELE
I have been involved in nutrition and weight management for over 12 years and I like to share my kn...more
|
 |
 |
 |
 |
MICHAEL BRESCIANI
Rev Bresciani is the author of two Christian books. One book is an important and concisely written b...more
|
 |
 |
|