|
The Cement equipments in our company mainly are: cement ball mill, cement rotary kiln and chinaware ball mill, which are the key equipments of cement production line. Many clients called us to consult that on the base of the existing production capacity, how to further improve the production line efficiency of Portland cement. Now, we are going to give a detail analysis of major factors that affect cement efficiency from the aspects of production facilities, production materials and composition of production line.
Portland cement refers to the hydraulic cementing material made of Portland cement clinker, 0%-5% limestone or granulated blast furnace slag, and moderate gypsum, which is classifies as P.I and P.II
The Portland cement productive technology is representative in the cement production, it use limestone and clay as raw materials, after crushing, dosing and fining the raw material was fed to cement rotary kiln , calcined into clinker, then into cement by add moderate gypsum( sometimes add some mix material or admixture) .
This jaw crusher is ideal for primary and secondary crushing. With the increase of production, our jaw crusher can greatly reduce the operating costs. And it is of reliability and flexibility. The large feed opening and force-feeding action from the inward and downward eccentric movement of the swing jaw mean that our jaw crusher can increase the capacity. The jaw has a smaller discharge setting, allowing for a higher degree of flexibility with relative equipment. Positive setting adjustment is easy. The jaw crusher has features of simplicity, easy access and low maintenance
The motor drives the belt wheel, and makes movable jaw up and down by eccentric shaft. When the movable jaw rises, the angle between the fixed jaw and movable jaw gets larger, and the materials can be crushed to reach the crushing target. When the movable jaw is down, the angle between the fixed jaw and movable jaw becomes smaller. The movable jaw plate leaves the fixed jaw plate under the function of drawbar and spring, and then the crushed materials are discharged from the lower outlet of the crushing cavity.
Related Articles -
business,
|
