|
To better understand this new concept, we need to introduce other manufacturers to design and use of the module - LED Modules .How to make the replacement process is simple, rapid, and the greatest degree is not a waste of resources, has been considering the issue of road lighting equipment manufacturers.Our company recommend it consists of three power 15W module composition. Each module is equipped with a DC constant current controller, to ensure the stability of the light source module. With the current energy saving project, the tradition of the tip of a road lighting has gradually relaxed many roads of the high pressure sodium lamps are gradually being replaced with LED light source, LED light energy saving advantages have been recognized, but difficult to install.high maintenance costs has not been resolved.How to make the replacement process is simple, rapid, and the greatest degree is not a waste of resources, has been considering the issue of road lighting equipment manufacturers.Today, the concept of the thermal rate proposed, the light module (referred to as modules), the process becomes very easy to install replacement. That is, the number of LED mounted on a flat substrate assembly to become an integral light source, according to the needs of the power to choose a different number of LEDs.This structure makes the production of lamp is usually a flat plate, so that looks relatively simple, but in actual use, but a lot of problems:1) the overall lighting heat conduction cooling, resulting in lighting larger overall heavier, cooling effect and the increase of the volume changed for the better;2) in the event of a single or a few LED is damaged, it will affect the glow of the light, while not independent repair of particles;3) flat-panel structure is very difficult for the second optical design, lens and reflector requirements are very high, it is often difficult to achieve a better lighting effect. And although they are housed in a plastic bulb that concentrates the light in a particular direction, unlike ordinary bulbs, LED lights do not have a filament that will get exceptionally hot or burn out. Generally the LED modules are custom made by expert hands. These do not cause release of heats in the environment. LED modules are enhancer of beauty and best tool for beautification of anything. Thermal management is the key issue for LED module design because luminous efficiency and lifetime of high-power GaN-based white LEDs are limited by heat dissipation.Temperature distribution of LED module under natural convection was simulated using computational fluid dynamics,and structure of fin for 5 W LED Module was brought forward and optimized.Then,other key issues impacting heat dissipation were analyzed.You can even decorate your home interior and exterior with the LED modules reducing your energy consumption to the lowest. This may improve your home environment drastically and push your standard of living higher enough.
Related Articles -
LED, Modules,
|
