|
HPC series hydraulic cone crusher designed by our company is a new type of cone crusher with international advanced level which brings in Germanic technology. Our hydraulic cone crusher greatly increases the production capacity, crushing efficiency and is suitable for replacing spring cone crusher and common hydraulic cone crusher in the mining and construction industry. HPC series hydraulic cone crusher and is the most ideal equipment for large-scale stone factory and mining crusher.
The safety spring system is the overload protection device, which makes foreign material goes through the machine without bring any hurt to it. The sealing modes are oil and water, which segregate the stone powder and lubricating system. The crushing chamber is decided by the purpose of ore, the standard model is suitable for medium crushing; the medium model is suitable for fine crushing and the short head model is suitable for fine crushing.
(1) Well ability of "selective crushing of bed material". Because of fully feeding, the materials will suffer crushing, cutting and fierce impulse force from all directions. In addition, impact force will generate from the materials inside, so that the grinding media wearing will be reduced greatly, which is only one nineteenth of rod ball mill. Unit crushing energy consumption of inertia cone crusher is only half of common crusher.
(2) Big crushing ratio, the particle size is adjustable. Inertia cone crusher crushing force has nothing to do with material hardness and filling ratio. And the crushing force is mainly decided by static eccentricity and rotor speed. It is very convenient to reach the required crushing ratio by adjusting static eccentricity torque, rotor speed and discharging port size. Depending on requirements, we are able to effectively avoid excessive crushing, so that improve fine ore production rate and output.
(3) The technical index is relatively stable; the finished product particle size is rarely related to liner wear.
(4) The operation and installation is convenient. Since the machine adopts secondary vibrating, the basic vibrating is weak, operation noise is low. Besides, it doesn't need large base and anchor bolt when installation.
(5) Good performance of iron. Because no rigid connection between movable cone and drive mechanism, if the material is mixed with objects that cannot be broken, fixed cone will suspension stop movement, while Exciter will continue to rotate around the movable cone axis, thus will not break the transmission system and the host. Combination crusher : http://www.hxjqcrusher.com/Combination-crusher.html
Sand washing machine : http://www.ore-machine.com/sand-washer.html
Screw classifier : http://www.crusher-export.com/classifier.htm
Related Articles -
culture,
|
