|
The process of banner finishing is the most tedious one. But now there’s a better and smarter alternative in the form of an innovative product called power tabs. If you have ever dealt with the task of putting up banners to promote your business, you would know that the process of banner finishing is the most tedious one. First, there is the hassle of giving out your banner for sewing or welding to create a hem. Then, you need to get hold of someone with a grommet machine to place grommets along the edge of the banner. Even if you decided to invest in these finishing machines and tools, it would cost you thousands of dollars. Needless to say, all this does lead to considerable loss of time, and it costs you more than you would expect. But did you know that you now have a better and smarter alternative in the form of an innovative product called power tabs? These little components take the hassle out of the process of finishing your banner. Here’s how this brand new approach to Banner Finishing works: • You get your banner printed as usual. Once this important step is done with, it’s time to apply the tabs. • These tabs are applied either all along the edge of your banner, or at the exact spots that you desire. • If you need to put up the banner at an indoor location or anyplace where there are no winds, you could use the light duty adhesive tabs that are smaller in size. • For outdoor use, you can use the larger tabs. Once the tabs are installed, you need to punch a hole through its eyelets. Pass a rope through this hole and you’re good to go! • If used in the right manner, these tabs can offer you thrice the amount of strength that a regular finishing process would normally offer with the use of grommets. In some cases you might have extra large banners that are more than six feet in length. For such banners, you could use the adhesive tab in conjunction with a power tape. This gives your banners unmatched strength, enabling them to withstand high-speed winds too. This single sided power tape is becoming increasingly popular with enterprises of all sizes. As you can see, the process of folding or sewing to create a hem is completely eliminated. The best part is, you don’t need to depend on a third party. You can finish banners of all sizes in a matter of minutes. By using power tabs, you can save hundreds of dollars on your banner projects. These components are also totally recyclable and re-usable making them highly environment friendly. So, the next time you have a banner finishing task at hand, opt for adhesive tabs instead of the conventional hemming method and mark the difference yourself! I have more than 20 years of experience in banner making industry. Follow my article to know new method of banner finishing
Related Articles -
Banner Finishing, PowerTabs, Banner Eyelets,
| 
