|
A Beyblade can give us sentimental value especially if it has won us several battles or was presented with a particular someone. And so, we would like to keep having fun with it as long as it could possibly can. On the other hand, they are beyond indestructible, previously being encountered with the stresses and abuses of bey battles. Its components, such as the energy wheel, fusion wheel, face bolt, spin top and satisfaction tip, could possibly get chipped, cracked, or worse, smashed into smithereens. A broken component can negatively customize the performance of a bey during battles.By making usage of some super glue, we will repair our broken plastic Beyblades component so we can use them again in battles. Those chips and glue marks will only perform the duties of battle scars which will even more endear these fighting spinning tops to us. Here are some simple tips on how to repair a Beyblade. 1. Disassemble the Beyblade. Always be careful not to lose any broken parts. 2. Take the broken plastic components and continue to fit the two parts back together like you would a jigsaw puzzle. If the crack matches and there is no large missing part, you can still fix the damage. If a large chunk of the component is missing, you might need to buy a replacement part. 3. Get a tube of fast acting and quick drying glue. Put some on the component's broken parts and put them together. Hold the two fragments firmly together until the glue dries. Avoid getting glue on your fingers and hand as the adhesive is very strong and could be difficult to remove. 4. When the glue has completely set, remove excess glue by grinding it off with an emery board. Make sure you sand away only the excess adhesive and not the plastic part. 5. Put the Beyblade together again and try to spin it with the launcher. Observe if the bey is spinning properly. If it does, you may use it again in battles. If the broken component breaks again at the same place, you may want to change it out with a brand new part. Remember that a repaired bey might have lost its integrity and may be unwise to use in a tournament. 6. For fixing a broken metal component, you may want to ask the help of an adult or someone who is familiar in using a soldering iron. Take the broken metal fragments and place them in a holder such that the cracked surfaces are jointly touching. 7. Gently solder the two parts together and wait for it to cool down. Then, turn the metal component over and solder the other side. Wait for the soldered parts to cool completely before reassembling the Beyblade. Launch the Beyblade to test it. Try to observe the way it performs with an opponent. If it breaks at the same place again, the harm need to be beyond repair and you will need to replace the component with a new one.
Related Articles -
repair beyblade, Beyblade, maintenance tips,
|
