|
In most all cases, damaged tile should be replaced. The big question, Did you save some extra tile from the original installation to make repairs? If you have a common tile, it may possible to buy new pieces, though there may be some slight color variations. If you don't have the spare tile, it's very possible to lay out a pattern combining some new tiles with the old tiles to look nicely integrated and give it that unique look. Repairing damaged tile is a cumbersome job that can be done by the average homeowner. But it is a messy, dirty job. Unless you already have a replacement tile and need only to replace one or two tiles, the time and energy it will take to repair your damaged tiles isn't worth the money Common Types of Tile Damage Chipped or cracked tiles are often created from impact and should be replaced. Scratched tiles should usually be replaced. Most tiles are glazed with glass, which gives them their waterproof qualities. Damage to the glaze puts the tile structure at risk. Often a tile's coloration is on the surface. Deeper scratches will uncover the white ceramic underneath. Tile discoloration is very rare. Usually a tile's color is set during the firing process. If for some reason discoloration happens, replacement is the only option. The best way to repair loose floor tiles is to remove and replace them with new tiles. However, when replacement tiles are not available, it is possible to bond loose tiles by injecting a liquid bonding material into strategically drilled holes in the grout lines between tiles. The activated bonding material is allowed to cure and the holes re-grouted. Worn tiles need to be replaced. The erosion created by normal wear and tear puts the tile at structural risk. Repairing Damaged Tile Grout Sometimes the tile looks nearly good as new but the grout is cracked and missing. Professional grout cleaning can remove years of stains and dirt from grout by carefully hand scrubbing each grout joint with special commercial tile and grout cleaners. The grout can then be sealed with penetrating grout sealers to minimize future stain problems. The color of grout can often be changed without re-grouting. The process also creates a stain-proof grout, preventing dirt and spills from penetrating the grout in the future. When grout is missing, cracked, and stained beyond cleaning, it can be re-grouted. After sufficient curing, the new grout should be sealed with a good penetrating sealer. Repairing Damaged Tile Caulking Moldy caulking is unsightly and unsanitary. It can also allow water to leak into the walls. The most common problem is at the joint between bathtub and tile or shower pan and tile. If these joints are not fixed in a timely manner, great damage to the structure can occur. Professionals can remove the old caulk and apply mildicide to the open joint. They should also thoroughly dry, wipe the surface with solvent, and apply a new bead of mildew-resistant caulk to the open joint. Tile Repair Alternatives When matching replacement tiles are unavailable and the cost of replacing the entire countertop is prohibitive, you might consult with a bath fixture refinisher. As long as the tile is still structurally sound, they can often repair chipped and cracked tiles with a special porcelain filler, then refinish all the tile and grout into a solid surface in the color of your choice. For more repair ideas, check out our main page here: carpet repair auckland
Related Articles -
carpet repair auckland, carpet repair, carpet repairs, carpet repair northshore, carpet repair west auckland, carpet repair east auckland,
| 
