After your trees have been successfully removed, there is one finally step before the job is finished. This step consists of stump removal in Silver Springs, MD. It’s a very good idea to hire professionals to remove the stump because they will have the skills and know-how necessary to remove the unattractive remains and will also have the equipment necessary to do the job. There are three common methods for performing a stump removal in Silver Springs, MD. Depending on how much time and resources you are willing to invest in the tree removal, you’ll have to decide which method is right for you. Probably one of the most common methods chosen for stump removal in Silver Springs, MD is the grinding method. This method also tends to be one of the most important methods of trunk removal. With the use of a tree stump grinder, the stump remnant is ground back and forth until there is at least a four-inch hole left in the ground. The goal is to remove the stump and the roots that are left over. Some people may consider renting their own grinder, but these machines are expensive to rent and can be dangerous to handle without experience. The next option is a chemical removal. In terms of labor, this is the easiest option. But it does take a lot of time and a little bit of expert know-how. To begin this process, the tree needs to be leveled very near to the ground. Then the stump needs several holes bored into it. To improve the effectiveness of the chemical removal, there should be many holes and they should be drilled as deeply as possible. Into the holes will go water and a fertilizer with high nitrogen concentration. The first number on the fertilizer represents the nitrogen content. Once the fertilizer has been inserted into the holes in the tree stump, it will take several months for the tree stump to break down. There are many ways to speed up the process, but you will still be measuring time in months, instead of hours. The third way to get a stump removal in Silver Springs, MD is to remove the stump manually. This is the cheapest way, but it will also be the hardest method. This method involves lifting the root ball and exposing it so that an ax and a mattock can be used to chop up the roots. This method may require the efforts of several people and can be very frustrating when well-established trees are concerned. Visit Us : http://bestvotes.org/Home%20Improvement%20and%20Interiors/
Related Articles -
tree, removal, Silver, Springs, MD,
|