|
Keeping your car in the right shape can sometimes be very difficult especially if you are a first time car owner, and you do not understand what it takes. For instance, tire balancing. Balanced tires are a very important for safe driving. When tires are not properly balanced they cause stress on the bearings, shocks and other parts of the wheel assembly. However, that does not mean that it cannot be done. You may require the services of an expert since improper alignment may some cause considerable damages, but if you understand cars and have the basic equipments you can do tire balance in just a few minutes. Below are some of the steps you need to keep in mind during the process. • Get rid of any previous wheels weights that are present on the wheel, since they pose a great challenge when it comes to wheel balancing. Then place the wheel and the tire on the balancer by way of inserting the shaft through the wheel hub and leaving it in place, bearing in mind that the wheel has to be centered on the balancer. • The next step is to gently spin the wheel in the balancer. During this procedure you will notice that the heaviest part of the wheel being drawn to the bottom and the lighter part on the top. Give it time to settle in position, and then place a mark on the lightest part of the tire. You could repeat the process just to ensure that you placed the right mark in the right place. To complete this process attach the wheel weights, adhesive side first to the area of the wheel that was marked just below the spot. This will intern counter the imbalance on the tire. • Slightly move the wheels to be in a 3 o’clock position. Let go of the wheel but if it rolls clockwise to place the weighted position is on the bottom, then that means you have added too much weight. In the event that it rolls to the top, then that is enough weight added. You may continue adding and subtracting weights until you attain the required balance, which should be at 3 o’clock position. Finally, to ensure that the wheel stays in position, secure it with a duct tape or any other similar adhesives. You will then need to remount the wheel to the car, ensuring that the lug nuts are secure. Helo wheel is a good example of some of the best wheels in the market, and the beauty is that they are available in a wide variety of sizes, which is perfect for any wheel assembly. Mayer is an expert writer with keen interest on exhaust systems and motors. You may find more information from
Related Articles -
helo, helo wheels, wheel, helo,
| 
