|
Timber Cooling towers are useful for chemical plants, air conditioning plants, oxygen plants.And its might be used for chemical industries, and water effluent treatment industries. It needs very high cost of maintenance charge to fullfill the Maintenance Procedure for Timber Cooling Tower everytime and it has a total energy efficient modules of systems is effectively need to be cooling with good maintained machine. The minimal usage part of fan is to be functioned with as moving part in timber cooling tower. Timber Cooling maintenance are constant allowing system of revolving sprinkler which may solving entire defects in the all bearing and remove all friction of all parts in Machine Body of Cooling Tower.The Timber Cooling Makes moderate operating cost is a great instant of HP motorsand its focusing to delivering quality products at very reasonable cost. Maintenance of TImber Cooling Towers Timber Cooling towers components are need to repair or maintain with in the time interval to cleaning and changing any part of the Cooling tower parts. If suppose the Machine needs that which parts may have to adjust,or remove. We want to follow the procedure of maintaining Cooling towers. Time Interval maintenance Parts are: 1. Heavy-duty aluminum alloy 2. Fiber-reinforced epoxy fans 3. Cast-iron Geareducers 4. Stainless steel driveshafts Low-maintenance Parts: We mind it for all Cooling Tower that materials of low cost parts ca be changes is well good and its cut off future major problem in cooling tower. To avoid Clogging: If we apply the widely splash area to filled up ,it will be better safe for cooling tower Keep Cleaned and Oiling: In the Cooling Tower where ever the option for fill up oil,grease,cool oil must fill up first and easily pointing area. Timber Cooling Types: Fan cylinder Casing & Louvers Stair Case Motor Target Nozzles Gear Box Drive Shaft Fill & Support Fan Assembly Fan The fan is of an aerodynamically designed axial flow type, which is required to achieve high efficiency. Motor This is one special low RPM, totally enclosed motors of vertical, flange type with enlarge and threaded shaft. The cooling tower comes with a sealed top, these motors are apt for all weather conditions. Mesh Equipped with special SS-304 mesh to hold the fills in the cooling tower. Fan Cylinder These Fan cylinders are aerodynamic in design. Their specific design allows close tolerance on blade tip clearance. Casing & Louvers In order to shed water, an corrugated asbestos cement board casing is applied vertically. Lapped and sealed vertical joints are only located in the dry areas . Fill & Support These splash bars are preservative-treated woods supported grids. The advanced design & special oceanic features hold the fill in position permanently. Target Nozzles The target nozzles used in the hot water basin are specifically designed to deliver required water distribution and high resistance against temperature and weather damage. For more information about Timber cooling tower
Related Articles -
Maintenance Procedure for Timber Cooling Tower, Maintenance Procedure for Timber Cooling Towers, Maintenance for Timber Cooling Tower, Maintenance of,
| 
