Features of hydraulic shearing machine
The hydraulic shearing machine is extensive shear equipment in machining, which can shear steel materials of various thicknesses. The commonly used shearing machines are divided into flat shearing machine, roller shearing machine and shock cut three types, among which level shear machine are mostly used. The hydraulic shearing machine whose shear thickness is less than 10mm is mechanical transmission, which is the hydraulic dynamic drive if the thickness is greater than 10mm. Generally we carry out single or continuous shearing metal by pedal or button manipulation. Hydraulic shearing machine uses the reasonable blade gap by the moving upper blade and a fixed lower blade to apply shear force to the various thicknesses of the sheet metal materials, so that the plate breaks and separates according to the required size.
Maintenance of shearing machine
1. Operate in strict accordance with the rules. 2. Timing, locate, quantitative add oil according to the lubrication chart requires before starting, the oil should be clean and free of precipitation. 3. The machine must always be kept clean and the unpainted part should anti rust and oil. 4. The lubrication waterfront oil in the motor bearing should be changed regularly and filled, and regularly inspect whether the electrical part of the work is normal, safe and reliable. 5. Regularly check whether the V-belt, handles, knobs and buttons are damaged, badly worn should be replaced promptly and report the spare parts for supplement. 6. Regularly check and repair switch, insurance and handle to ensure its reliable work. 7. Lubricate and scrub clean the hydraulic bending machine 10 minutes before work every day. 8. Non-designated personnel are prohibited to operate the equipment, and usually the machine must be stopped when the operator is away.
How to select hydraulic shearing machine
The selection of hydraulic shearing machine is an important step; the selection of a good bending machine will have lot of assistance from the future jobs. There are more and more bending machines on the market, but all kinds of bending machines make us not know how to pick. Today we will teach you how to buy bending machine. Once the selection is wrong when selecting  , the production costs will rise and the hydraulic shearing machine cannot recycle capital as expected. The first important matter worth considering is the parts you want to produce, the key is to purchase the machine which can finish the processing mission and has shortest operating station as well as minimum tonnage. Think carefully about the information trademarks, maximum processing thickness and length. If the maximum length of the most operating is 10 feet (3.048 m) low-carbon steel, then the tortuous force should not be greater than 50 tons. However, if you engage in a lot of bottomed die forming, then should probably think about a 160-tonnage machine.
This article come from:http://machine.china-fillingmachine.com/hydraulic-shearing-machine/how-to-maintain-and-purchase-hydraulic-shearing-machine.htm
Related Articles -
hydraulic shearing machine, hydraulic bending machine,
|
