|
When you want to keep yourself informed about the most current technology, you cannot be more satisfied than when you know about the 3D scanner with which you can enjoy hybrid positioning using white light. With this scanner you will scan big objects in no time at all. What would amaze you is that processing is not required following this. This scanner is named GO! SCAN 3D. The scanner allows a great deal faster scanning than the other traditional devices employed for the purpose of 3D scanning. The all new scanner can scan objects with large dimensions so that scanning gas tank on the car is not a problem and the process cannot take more than a couple of minutes. The time to create 3D mesh is included in that the duration. The device does not take more time in being set up initially because it does not require a tripod stand or the supporting equipments for being set up. This lets you start the 3D scanning without delay. Including time taken for calibration optimization, this scanner does not take more time than a couple of minutes to start. With the help of USB connection you can connect this scanner to computer as well. There are two cameras along with LED protector in this scanner. The use of advanced technology enables this scanner to scan in a very short time. The 3D scanning is powered by the software by Creaform, VXelements. The technology helps in a quick processing of information and also in developing 3D surface right at spot in real short time. The procedure leaves no space for aligning objects manually. This scanner is provided with the characteristic of hybrid positioning that enables the gathering of information from a number of sources for a more accurate creation of the model. The device employs the methods of geometry in order for positioniong the information which is required to capture. Projection of white light is done on the object requiring 3D scanning. Light will be adjusted to the measure of the specific object. The bending of the light affects the capturing of information. In case the object you desire to scan is smoother than required, you can position the target in order to align information which you need to capture. This scanner follows advanced technology so to leave behind the traditional scanners far behind in the facilities it offers. Our Rapid Prototyping Services include SLA, SLS, FDM, 3D Printing, DLP, Polyjet, 3d scanner, Direct Metal Laser sintering technologies etc with a rich and successful past of helping companies to save thousands of dollars in product designs, rapid prototyping and 3D scanning needs. http://www.ems-usa.com/
Related Articles -
3d, scanning,
| 
