|
99 times out of 100, the door locks on a Chevrolet can be counted on to last as long as the rest of the vehicle. If some sort of damage occurred or you were unlucky enough to get a bad assembly, however, you may need to repair or replace the locks before the rest of the car is ready to give up the ghost. If the vehicle is still under warranty, you can take these repairs to the dealership and have them done for free. If not, it will be up to you to find a mechanic or do it yourself. Switching out the lock isn't the most difficult form of car repair, but it can be challenging to someone with little prior experience. Here's an overview of the process. The Interior Module If the interior module has failed, you'll need to pry off the trim covers from the door panel with a special tool intended for this purpose. You should be able to procure this tool at a discount auto parts store. Underneath this trim will be several bolts that are keeping the panel in place. Exactly where these bolts are located will depend on which Chevrolet you own. Unscrew these bolts and keep them in a safe place. You can use the special trim removal tool to take the panel off, removing the retaining clips that keep it secure. Next, get the lock rod disconnected from the control module and pull it out of the assembly. The actuator will be held to the panel with screws, which can be removed with a standard screwdriver. Take out the electrical plug and remove the lock itself. You can then install the new lock assembly by reversing the process. Exterior Module To replace the exterior door lock module on a Chevrolet, you must start by removing the two bolts that secure the assembly to the frame with a socket wrench. You can then slide the assembly off the frame by working from the outer section of the door. Take your new assembly and line it up with the mounting bracket and the hole in the door. Keep it steady as you put the bolts back in and tighten them. Some people may find it (much) easier to do this work with an extra set of hands to hold pieces in place while they screw in bolts and screws. Professional Installation If your warranty has run out, you might be surprised to see how expensive Chevrolet door lock replacement can be when done professionally. Nonetheless, if you don't have any specific experience working with these kinds of mechanics, it may be worth it to simply shell out the money and have the job taken care of. To purchase or receive service on a chevrolet decatur al residents have a trusted and reputable dealer ready to help them with all of their automotive needs. Locals should visit http://www.championofathens.com today to learn more.
Related Articles -
chevrolet, decatur, al,
|
