|
Weiber supplies an extensive array of FRP Fume Hood to their customers. The variety of chemical hood manufactured by Weiber includes Fume Hood, Fume Hood Table Top, Mobile Fume Extractor, Fume Hood Duct Less, and Fume Hood Wet Process. Weiber Fibre-reinforced plastic Fume Hood is highly acknowledged in the market owing to their excellent performance and low maintenance. Weiber products are articulately designed by our team of experts and professionals and have been acknowledged in domestic and international markets. It is a fume cupboard type of local ventilation device that is designed to limit exposure to hazardous or toxic fumes, vapors or dusts. Weiber is a premier manufacturer and exporter of Chemical Hood in India. Weiber scientific equipments are made in compliance to meet the international industry standard. Our equipments are NABL, ISO and CE certified. Weiber is a specialist of both customized and standard FRP chemical Hood. The microprocessor based Fume hood are extensively used in a laboratory, to ensure personnel safety that they won’t be exposed to too many hazardous and dangerous fumes. A fume hood is typically a large piece of equipment enclosing five sides of a work area, the bottom of which is most commonly located at a standing work height. Weiber designs FRP Fume hood with mainly two main types of exist, ducted and re-circulating. The principle is the same for both types of Chemical hoods: air is drawn in from the front side of the cabinet, and either expelled outside the building or made safe through filtration and fed back into the room. The Chemical hoods are needed to control airborne hazards or irritants that are typically generated or released within the local ventilation device. All local ventilation devices are designed to address one or more of three primary goals to protect user, products and environment. These are the most sophisticated hood types, requiring technically proficient design, installation and maintenance. A tissue culture hood is designed to protect biological specimens by bathing the work area with a laminar flow of air free from particulate contamination. Because these devices force air out across the work surface and toward the worker they protect only the specimen, not the user. Air is passed down from the top of the hood and across the work surface, and is exhausted or re-circulated without entering a worker's breathing zone. The air is re-filtered before being exhausted, usually back into the laboratory. This filtration only removes particulates and aerosols, not gases and vapors. ACMAS Technologies is a leading Manufacturer of Industrial & Lab Equipments, Which Are Used in Various Applications like Sedimentation, Centrifugal Forces, Quality & Reliability Testing, Histopathology, Powder Coating etc.for more information Visit acmasindia.com
Related Articles -
Chemical Hood, Fume Hood,
|
