|
A laboratory air shower is a self-contained unit that utilizes specialized, high efficiency air flow and other technologies to effectively remove all types of contaminants from the every individual. All of our Air Showers feature Hi-Flow V-Bank HEPA or ULPA Filters, recessed lights, Interlocking doors, and PLC Programmable Logic Controller and Emergency Stop buttons. They minimize particulate matter entering or exiting the clean space. Personnel and materials entering or exiting the controlled environment are "scrubbed" by high velocity HEPA-filtered air jets with velocities of 20-22m/s (4000-4300fpm). Contaminated air is then drawn through the base within the unit, filtered and reticulated. Our Laboratory Air Shower/Clean Room Air Showers have a wide usage in all the clean rooms and various microbiology, biochemistry, bio technology, micro-electronics, semiconductors, pharmaceutical, spray painting, lab animal research and food markets and genetic engineering laboratories. Our clean room laboratory air showers help solve the problem of de-contamination from personnel into the clean rooms. We specialize in standard air showers and customized clean room air showers, specially designed to meet the challenging demands of various basic and applied science laboratories. Over a short period of time we have been established as reliable air shower exporters in India, catering to the vast markets in South East Asia, Middle East, Africa and Europe .in the micro-electronics, semiconductors, pharmaceutical, spray painting, lab animal research and food markets. Standard construction is Wood board with plastic laminate exterior. Corrosive Resistant Polypropylene, Epoxy Painted Steel, 304 or 316L Stainless Steel units are also available. Top loaded High Efficiency Particulate Air (HEPA) Filter: 12” thick V-Bank Hi-Flow maniple design 99.99% efficient @ 0.3 micron in an anodized aluminium frame, PSL tested in accordance with IEST Standards. Adjustable air nozzles on walls and ceiling shall be white plastic construction sized and spaced to provide an average of 6000 - 7,000 fpm air flow at the face of the nozzle. Anodized aluminium entry and exit doors with push/pull hardware, hydraulic door closures and acrylic, polycarbonate or safety glass inserts. Moreover it is equipped with a Programmable Logic Controller (PLC) shall be used to control the sequence of operation of the Air Shower, an Emergency Off button (EMO) shall be located inside and outside of the Air Shower in a conspicuous location, Door sensors shall be 24 volt DC magnetic reed switches. Door interlocks shall be 24 volt, located in the doorjamb. All locks shall automatically release upon loss of power or when the (EMO) button is pressed. ACMAS Technologies Is a Leading Manufacturer of Industrial & Lab Equipments for Various Applications IncludingBiochemical Testing, Sun Simulation, Sterilization, Moist Heat Sterilization, Dry Heat Sterilization, Aseptic Environment etc. for more information Visit acmasindia.com
Related Articles -
laboratory air shower, air shower,
|
