|
If you are looking for a company who would help you in the customary scanning of the electrical switchboards’ defensive protection and assignment purpose, you do not need to look any further because thermal imaging conducts all these works on a routine basis with dedication and loyalty. They not only help with scanning of your switchboard, but also help with the following services such as: · Scanning the motors and the gear boxes · Scanning of the overhead lines and the LV and HV equipment · Scanning of transformers and power factor units. The best quality of thermal imaging is carried out because they make the use of the state of the art equipment, such as a unique camera, which is thermo-sensitive and gets hold of any kind of location that requires immediate attention. After researching on the fault, its site, and gravity, they prepare two reports based on the faults. Then the reports are sent back to the protection engineers who note the period required to fix the problem area. They also make sure that the evaluations are usually carried out every twelve months; however, there are some customers who have need of a report that is either half-yearly or quarterly. They are one of the most genuine service providers who make certain that the work is completed in time, and they meet the terms of their customers and H&S methods. After completion of the work, they provide each customer with an official document of compliance. Thermal imaging requires people who focus the equipment on the defective items, for example, faulty switchgears. The imaging equipment can be used for the routine scan of transformers, production equipment, gearboxes, and motors. Due to the specialist nature of the business, it is likely that companies involved in this line of work will have an extensive client base consisting of renowned hospitals, hotels and clubs, factories, government buildings, small industries, schools, and many others. The equipment may also help in helping you control pests such as rodents and white ants. All the scans that are conducted should be checked and rechecked so that there is no technical snags identified. They are normally checked for analysis purposes and accurateness. The operators are always present in case of immediate assistance, and they will arrive to check any kind of fault and advise you of the likely outcome. A well-trained and qualified engineer can oversee the work where there is more technical expertise required, treating every job with the correct level of importance before preparing reports that are signed off and sent out. All client records should be preserved safely in case there is a need to be reminded about when a scan is due or to check back on previous ones. Reports After thoroughly scrutinizing the location, a report is created which: · Maps the surface temperature of the faulty apparatus. The infrared radiation is determined by a gamut of colors. · It explains the severity of the incident and suggests an accurate period for the repairs. The reports are available following the inspection and scanning process in hard copy for the customer’s records.
Related Articles -
thermal imaging, thermographic imaging,
|
