|
A clean room or clean room is an environment, typically used in manufacturing or scientific research that has a low level of environmental pollutants such as dust, airborne microbes, aerosol particles and chemical vapours. Clean rooms maintain particulate-free air through the use of either HEPA or ULPA filters employing laminar or turbulent air flow principles. Laminar, or unidirectional, air flow systems direct filtered air downward in a constant stream towards filters located on walls near the clean room floor or through raised perforated floor panels to be re circulated. Laminar air flow systems are typically employed across 80 percent of a clean room ceiling to maintain constant air processing. Stainless steel or other non-shed materials are used to construct laminar air flow filters and hoods to prevent excess particles entering the air. Turbulent, or non-unidirectional, air flow uses both laminar air flow hoods and non-specific velocity filters to keep air in a clean room in constant motion, although not all in the same direction. The rough air seeks to trap particles that may be in the air and drive them towards the floor, where they enter filters and leave the clean room environment. The only way to control contamination is to control the total environment. Air flow rates and direction, pressurization, temperature, humidity and specialized filtration all need to be tightly controlled. And the sources of these particles need to controlled or eliminated whenever possible. There is more to a clean room than air filters. Clean rooms are planned and manufactured using strict protocol and methods. They are frequently found in electronics, pharmaceutical, biopharmaceutical, medical device industries and other critical manufacturing environments. It only takes a quick monitor of the air in a clean room compared to a typical office building to see the difference. Typical office building air contains from 500,000 to 1,000,000 particles (0.5 microns or larger) per cubic foot of air. A Class 100 clean room is designed to never allow more than 100 particles (0.5 microns or larger) per cubic foot of air. Class 1000 and Class 10,000 clean rooms are designed to limit particles to 1000 and 10,000 respectively. There are several important items you need to keep safe, when you are driving and this includes glove box. It would be best if you put emergency kit in your car, in order to deal with emergencies while in the car or outside it. Clean room equipments are closed rooms which control the amount of particulate matter in the air by using air pressure and filters. These equipments use specifically designed to control the amount of particles per cubic meter at a specified particle size in the room. ACMAS Technologies is a leading Manufacturer of Industrial & Lab Equipments for various Applications i.e. Drug formation, Clean room compatibility, Animal body preservation, Chemical preservation, Ultra low temperature preservation etc. for more information Visit acmasindia.com
Related Articles -
Air Shower, CleanRoom,
|
