|
Many people have wondered if roof installation in Withamsville OH is something that they could do themselves. Even though it is a complex job and is much easier to have a professional company do you Withamsville OH roof installation it is possible to do it yourself. This post will discuss three different things that you need to do before you try to do your own installation on your roof. 1. Prepare the area by waterproofing First of all before you put on any shingles your need to make sure that you waterproof the area. This is an important step to the roofing process and if skipped it could create expensive problems. This is because you need to make sure that the water will drip off the roof instead of settle. That is why when many professionals do roof installation in Withamsville OH they will put on what they call a drip. This is a layer that goes underneath the shingles that will allow the water to drip down the roof and go into the gutter. During this phase you should also make sure that you have the proper googles, gloves and other protective wear for a roofing job such as this. After you put the drip on you will need to lay down the tar paper. This is a heavy type of paper that you will actually roll on the roof. This comes in different weights and the heavier the weight the more expensive, but also the more durable your roof will be. This tar paper will protect the roof when it rains and snows. Many people will want to skip this part to save money because as far as the eye can see the tar paper is not needed. However, this can be a very costly mistake and should never be ignored. 2. Lay down a layer of starter shingles These starter shingles are the shingles that will go on the outer layer of the house. They should be placed first so that you can make sure that the lines are straight and that you have everything that you need before you begin the rest of the house. As you may notice on all roofs the shingles are staggered. This is a very important part to roof installation in Withamsville OH. The seams should never be lined up on the roof. If they are lined up then you will get water damage. Instead all of the shingles will be staggered. 3. Lay the rest of the shingles With a nail compressor gun you can lay the rest of the shingles. You need to move from one side to the next so that you can keep the pattern the same. You start at the bottom of the house move from left to right, if you're right handed, and right to left if you are left handed. This way you do the bottom layer and then move your way up. Make sure that while you doing this that you are being very careful with the nail gun. Many people have injured themselves and others by not being careful and using the safety features on the nail compressor. This is not a time to be forgetting about safety precautions. Even though roofing your own home may seem like a great way to save money, it is better if you can hire professionals or even work along side of a professional and do it together. If however, you need to do it on your own then make sure that you follow the steps provided here to ensure that your roof is waterproofed and safe.
Related Articles -
roof, installation,
| 
