|
Even though the power supplied by the electricity service providers is 240 volts sometimes there is fluctuation ranging between 210 – 250 volts at the consumer end. The fluctuations depend upon various factors like how the electricity is flowing through power stations and switching facilities etc. If there is a constant fluctuation and the light flickers, it means there is a voltage problem. There could be many reasons for fluctuations and unless the problem is rectified it could cause damage to electronic appliances at home. Voltage problems give rise to many questions that are asked to electrical experts online. This article provides answers to some of the most commonly asked questions about such problems : Is it possible to convert low voltage switches at home to regular ones?
It could end up being an expensive procedure. You have to install the cables from the switch opening back to the relays and then junction them up. There are devices available in the market for low voltage systems and the wiring will not get affected by overload or age. Hence, it is better to use such existing systems. A voltage problem in my house is causing serious problems with my electrical appliances. The lights, window air conditioner and the washing machine are being severely affected. Is the problem with the electricity company or at my home?
The problem could be at your home but needs to first be detected. To do that, first of all, open the electrical panel and examine the terminations of the wires thoroughly. The incoming feed wires must be properly checked. There is a possibility of having a loose connection at your end which might be the source of the problem. If the wires are loose, only thing to be done is tightening all the wires. Due care should be taken while doing this, since some of the wires might be hot. What could cause voltage to fluctuate in a house circuit?
A voltage drop or a poor connection could be the reason for voltage fluctuation on a circuit. Fluctuation could also be the effect of changes in the power distribution from the power company’s supply side. While changing a burnt out 400 watt multi vapor lamp without shutting off the breaker the glass somehow broke and my employee touched the lamp electrodes accidentally. Since it was live then, he received an electric shock. Since the lamp was burnt out did he get a shock of 208 volt from the breaker or of a higher voltage?
It is difficult to ascertain the exact voltage of electricity passing through at that moment when the shock was received. However, it is most likely that he received a shock of 208v which could have proved fatal had he still been in touch with the lamp. Voltage fluctuation is one of the major causes of damage to electronic devices since they are supposed to operate with a certain level of power. A stabilizer can be used to stabilize the voltage and thereby ensure a steady supply to the electronic equipment. Stabilizers are of various kinds and an electrician can suggest the best one to use in your home. If you have any other query about voltage related problems you may ask an electrician to answer your specific questions quickly and affordably.
Related Articles -
voltage, high voltage, low voltage, low voltage wiring, high voltage supply, electrical voltage, voltage problems, voltage questions, voltage fluctuat,
| 
