|
It is always frustrating when your computer acts up at a time when you need its services most. Perhaps you are in the middle of a career changing teleconference or at the brink of leveling up in your favorite game ever when without warning – ppfffttt. You may get too frustrated that you unnecessarily go out and buy a new computer instead of finding out what is wrong. With a cool-head and a little know-how, it is easy to troubleshoot and undertake computer repair to fix most computer problems. Troubleshooting is a mode of problem solving. It is performed to repair failed products or processes like that of your computer. It is a logical, systematic search for the source of a problem so that it can be solved, and so the product or process can be made operational again. Troubleshooting is needed to develop and maintain complex systems where the symptoms of a problem can have many possible causes. It utilizes the process of elimination in diagnosing the potential causes of the computer problem. It is always good for anyone who works with computers to learn how to troubleshoot. To begin computer repair, you need to answer this question: Is it a hardware or software problem? This question alone begins to isolate the problem and divide between the two primary issues that cause a computer to fail. Once you recognize which side the problem lies on, you can then start focusing on specific solutions. To address this, eliminate all possible causes of one category then the other or simply figure out what an error message says. Beeps emitting from the computer during POST is probably a hardware problem whereas an error message with a path to a program file is probably a software problem. If you are getting error messages, write down the message and do a search on that in the internet. If the computer is still able to boot, reboot it when it is acting strange or encountering errors. Often rebooting solves many computer problems. If any new hardware devices have been connected to the computer or any new software has been installed, it is highly likely to be the cause of your problem. For a software concern, identify the program and all possible reasons of the interference with this program such as recently installed software, or other programs running at the same time that do the same thing as the program having problems. Remember that every software program has bugs, and most can be fixed by installing a patch or update provided by the software manufacturer to correct known problems. When you suspect a hardware problem, attempt to isolate the issue and remove all peripherals one at a time. Have all of your hardware checked for any signs of damage, disconnected/frayed wires, or anything out of the ordinary. If you have moved your desk top computer recently, something may have loosened inside or something may not have been properly reconnected. A loose cord could change the way your hardware is working without disabling it altogether. Make sure none of the plugs are loose, that all of the screws are tight, and that all of your components are turned on. computer repair Ontario CA
Related Articles -
computer, repair, Ontario, CA,
|
