|
Our society is vastly growing in size and number in terms of structures and building. Homes are built massively in numbers to compensate the growth of our population, aiming to put everyone in a house. Many technologies are developed to attain precision and quality all at the same time. In engineering, panelised construction is the new thing, since a lot of engineers and architects as well as business firms use panels as a basic material in a building, though this kind of construction started out early 1900’s. In the early days of prefabricated houses, all the materials used in building a house are within a kit. Choices of designs and sizes are somewhat limited. Today, designs are limitless and sizes are with the homeowner’s discretion. Building any structure with panels takes a really short period of time, and it saves a lot of money. Time is the only thing that is more valuable than money, and by greatly downsizing the construction time is a benefit that stands out from the rest of the advantages this type of construction has. Traditional stick built homes is custom built on your site and you have many design and material selections. The downside to this is that they usually take longer to complete, the builder does not get volume discounts and it is a higher cost. Usually these builders only build a few homes a year and must make their yearly income on a few homes. Panels are pre-engineered wall sections that are produced for a new home in factory-controlled conditions, and then shipped complete to the building site for complete construction. Panelised construction is most often accomplished in sections, where large, pre-cut sections of structurally insulated panels are fitted together and attached with nails and adhesive, eliminating the need for framing studs. The strength of the wall panels is sufficient to support the roof panels without the need for ceiling joists and space-consuming cross members. Additionally, structural insulated panel construction provides better insulating properties, along with faster construction time. With all the speedy construction time, the quality of the building is never compromised since every state has a standard to follow in putting up panels to form a section, and the contractors are closely inspected by accredited inspectors to assure that everything is in order and safe. The panels used in panelised construction are often made structurally insulated, making it energy-efficient. In traditional stick building, a separate installation of insulation in anyone’s wall costs a chunk of money, and putting them up together takes a period of time. By this fact, the panels are clearly in advantage to everyone that seeks quality without spending too much. Panelised construction leaves less impact on the construction site, since most construction crew spends most of their time in a factory rather than on the construction site. The raw materials that consists the panels are mostly from recycled material, like wood power, leaving Mother Nature less consumed. Science has brought a lot of good things to human kind, and in engineering, panelised construction is indeed a breakthrough. It brings a lot of promises to aspiring homeowners, giving good value for their money as well as giving back to nature. Panelized Construction NJ
Related Articles -
Panelized, Construction, NJ,
|
