An Austin plumber needs to address a wide variety of water heater problems. The most common ones among them are: the unit’s failure in heating up water, insufficient heating of water, leakage in the relief valve etc.
Today, water heaters are used by the majority of the households. Some households use gas heaters while the others prefer using electric units. Like you do in case of all other appliances, defects in a water heater should also be mended as quickly as possible. The city of Austin, Texas has several plumbing companies that offer heater repair services to the residents of the city. The discussion below will provide you information about the common electric water heater issues handled by an Austin plumber.
Failure in Heating up Water
At times water heaters fail to heat up the water in them as a result of tripping of the switch button used for setting them at high limit. In such situations, the problem can usually be solved by the user himself; often resetting the tripped button makes the unit functional as before, which can be done easily by a layman. However, if the thermostat located in the heater’s input terminal does not have any power in it, you should contact a plumbing expert to get the circuit breakers and wiring checked for defects. The repair person appointed by you will replace the unit’s upper heating element if it fails in heating up the water. On the other hand, if the primary reason behind the heating element’s failure of heating up water is unavailability of power, then the plumber will replace the unit’s upper thermostat.
Insufficient Heating
This is another common problems faced by individuals using water heaters. Thermostats are used for supplying power to water heaters. An upper thermostat performs the job of transferring power from the device’s upper heating element into the lower one. If there’s a defect in your heater’s lower-thermostat the temperature of the water you will be getting from different outlets will not be high enough. Thus it is extremely important to get your water heater checked by a professional even when you find that the water you are using is not sufficiently hot.
Relief Valve Leakage
Relief valves of electric water heaters usually develop leakages either due to high pressure or because of high volume. When the pressure becomes extremely high, you must call a reliable Austin Plumberto get a pressure-lowering valve installed. On the other hand, if the problem is caused due to excessive increase in temperature, the repair person hired by you will need to mend the grounded element or the thermostat.
Author Bio:
Advin Andrey writes informative and unique articles about Drain cleaning Austin.
Related Articles -
Austin Plumber, Drain cleaning Austin,
| 
