|
Laminate is one of the easiest floors to maintain. Ironically it gets scratched, chipped and damaged pretty easily as well. To prevent such imperfections from ruining your laminate floor, the best option you have is to properly seal and coat the entire surface of the floor. This article will show you how to do this properly by using some of the more-commonly used product for both sealing and coating. One of the main reasons you should coat and seal your flooring is that if the floor comes in contact with water, it will be protected. Usually even the smallest amounts of moisture that remain on the surface of laminate can cause warping. Especially if the joints haven't been sealed. This often resolves in a repair process accompanied by both coating and sealing procedures. For both sealing and coating, you'll need: "Laminator Plus" Deep Scrub "Laminator Plus" Restore "Laminator Plus" Buff Dry Cleaner A sponge mop A bucket Water A microfiber mop Extra microfiber mop pads Like most procedures that involve applying protection to your floor, first, you'll need to prepare the surface for the procedure. To do this, mist the Deep Scrub onto the surface of the floor and let it sit for 5 minutes. Next, dampen the sponge mop and proceed to scrub the floor with it. Stop scrubbing to wring out any excess moisture from the mop and then use the mop to gather any remaining moisture from the floor. Rinse the mop and repeat the scrubbing process by using clean water to ensure that any residue left from the "Deep Scrub" has been properly washed away. Now leave the floor to air dry. After it has dried completely, pour the "Restore" over the surface of the floor. This time, use the microfiber mop to spread the product over the floor in one direction. Afterwards wait 20 minutes for the product to dry. Note: If you apply a second coat of the "Laminator Plus" Restore, you'll get a bright shine. A third application will give the flooring a very high gloss. Now that you have successfully sealed and coated your laminate floors, remember that they will need routine cleanings. For these, be sure to use the "Buff Dry Cleaner", while buffing the surface of the floor with a clean microfiber mop cloth. Since experts work with these products as well, you can always call your favourite builders in London for any questions you may have regarding the products or the procedures as well. If you feel you're not up for the tasks of coating and sealing, just give the professionals a call.
Related Articles -
sealing laminate floors, coating laminate floors, laminate floor maintenance, maintaining laminate floors,
| 
