|
Fly ash dryer practices are never forget clear Fly ash dryer operating at the outset to do, say, a thousand miles begins with one step, what it means. Good beginning is half the success. In the use of fly ash drying machine, drying machine you want to use the Code must be clear in order to be more effective. Here the Code as follows: (A) fly ash dryer must be carefully checked before using the rotating parts is flexible collision, adjustment mechanism is normal, safety Light Weight Block Machinefacilities are complete and valid; make sure no debris inside the machine, the lubrication parts to add oil. (2) the work of fly ash dryer feed materials should be uniform to prevent stones, sticks and other hard objects feeding machine. (3) drive belt connector firmly prohibited when the Flotation machinemachine is running belt hook to hang or place any objects in contact transmission parts. (4) supporting the power and the transmission ratio between the thresher to meet the requirements, so as to avoid thresher speed is too high, so that part is damaged or loose fasteners and cause personal injury. (5) fly ash dryer during operation, such as ball milla failure, should be shut down before maintenance and adjustment. This five-point Code ash operatives in the operation, remember that it must be done in place. Unqualified operation is unsuccessful, the operation of the dryer efficiency and quality of the finished product can not be ignored. Pay close attention to the quality, start small.http://www.yfballmill.com/Autoclave-Aerated-Concrete-(AAC)%20Production-Line.html
Related Articles -
Fly, ash, dryer, practices, are, never, forget, clear,
|
